A9 infrared human body induction phone Automatic callback mini GSM home anti-theft positioning alarm APP

个人 定 位器 器+ 外 侦测 测A9快 快 使 用 指 南
您在使用之前 使用 明书 以便正 安 和快 使用 产品
以实物为准
使 用 前 准 备 1、
检测 备型号是否正 件是否 全。
买的SIM卡 开 GPRS功 和来电显 功 仅支持的SIM卡 2G GSM 3G
WCDMA /TD-SCDMA 4G TD-LTE
在手机 安 APP客户 客户 情可 你的 商
机器上的条形 用来注册用户 开机后务必写入机器的条形 格式如下
信 " imei#条形 # " 条形 内容 机器机 发 到机器,
相应的新的串号就会成功写入 回"IMEI number write ok." 。
产 品 功 2、
基 定位 手机客户 控制方式 ?8?5
GPRS实时定位 监控 PIR感应 ?8?5
对 回 ?8?5
人体 外 发 低电 报 ?8?5
关机 拾 ?8?5
回拨 动侦测报 ?8?5
三 、 定 位 器 介
灯 : 按一下 到机器灯 烁一下 机器在开机状态。
部 分功 能 说 明 ：
當人 時,會 動啟動報 A
在4-5 圍內 敏度 B
把侦测器放 一定 相 人 在5 內左右 度 圍120° C
以內 只 人來回晃動 在 常 時 內 动啟動报 。
分 信 指 令
定号 alm +电 号 如 alm 755896875 仅只 定一个号。 1
更改上传数据时 uptime# 数 如 uptime# 400 更改时 2
为400 大数值为65555 出厂 为300
侦测报 模式-电 拨打 / 信回复 call / sms 出厂 为call模式 3
动侦测关和开 000# / 111# 4
查 机器参数指令- 启 param# / reset# 5
关 gprs 接和打开 接分别为 GPS#0 / GPS#1 6
查 串号 / 恢复出厂 IMEI / factory# 7
更改APN APN# 名# 如“APN#CWNET#”即更改为 CWNET 8
以上指令 不分大小写 后发 机器
四 、 客 户 操 作 明
5.1 APP下 下 及 理 员 号 注 册
1.下 下 安 app
使用智 手机扫描二 下 APP- 丢 在浏 器中打开再下 以下为国内二
注 意 微 信 或 QQ扫 扫 描 二 无 法 下 使 用 其 他 扫 工 具 扫 描 下 或 安 卓 手 机 在
应 用 宝 安 卓 市 场 搜 下 果 手 机在 在APP STORE 搜 搜 下 丢
2.新 新 用 户 注 册
下 完成后 新用户点击注册图标 按照提 号注册。
注意 求注册的 号一 填写家 的手机号 。
3. 定 本 产品 品A9
号注册成功后 将A9 定到 号 定本产品A9使用的是机 上的条型 。
注意 一个手机号只 注册一个 号 一个 号可以 定多个定位器A9
一个定位器A9也可以 多个 号 定
添 加 员 有 三 方 式
可以手工 入 丢号 手机号或 备ID 添加
也可以扫描对方的二 添加
对方扫描 二 加入
图 1 图 2
点击 后 择 “定位器” 再扫描二 或 手动添加 如图
主 界
点 击 下 拉 圈 会 出 现 功 列 圈 是 分 暂 支 持 的 功 A．
即 定位 位 : 上 更 新 当 前 的 位 信 息 1)
监 护 号 定 监 护 中 心 电 号 2)
定 位 率 率 上 传 数 据 时 3)
低 电 报 开 开 启 或 关 低 电 压 提 4)
5.2 主 主 功 介
1. 主 主 界
注册完成 在登录界 入正 的 号和密 点击登录 入主界 。主界 如下图所
分 暂 时支 持 的 功 明
1 1 查 可以查 员的当天和历史 3天 显 有列 和地图两
模式 同时提供 动播放和手动查
图 1 图 2
2 率 以分 时 在 好几分 后 侦测器每几分 会更新一下 信息
3 监 护 一 为家 号 开启监听后侦测器主动 的号 拨号
侦测器不 听到手机的声 手机可以监听侦测器.并且没有任何 动 提 。
4 关 机 侦测器开机正常工作后不 按 关机 只 app 关机和 启
5 免 扰 当 定监护号 后 机器就只 接受 定的号 电 打入 其他不 打
6 监 护 号 必 了号 才 使用 监护功 好 家 的号
7 电 子 围 栏 在本相同机器的 电子围栏后 本定位器 出围栏 会 心
提 告 你。
5.3 APP报 报 推 信 息 明
侦测器各 报 之后 客户 会收到报 推 手机客户 点击报 入app主界 可
入信息查 具体内容。如果手机没收到报 推 检查手机的 是否打开。
六 故 排
机器 次开机无法 接 服务器 app发指令显 备未 。 检查
机器 的SIM是不是TD-CDMA 的 比如电信就不支持。 1)
机器 的SIM卡是否开 数据流 必 兼容2g的数据流 机器目前只 2)
使用2g 的数据流 。
服务器参数即IP和 口 ID是否正 必 保 机器 的id条 和机器出厂 3)
写入的id一 机器必 卡开机 如有不懂可 代理商。
注册不了有两 情况 a. 提 备号不存在或 备号已注册 必 找代理商处理 4
b. 提 号已注册即 号已注册,客户只 换一个 号可再次注册。
Personal locator+infrared detection A9
Quick use guide
Please read the operation manual carefully before use, so as to install and use it correctly and
quickly. Please refer to the product color!
1、 Preparation before use
Check whether the model of the equipment is corre ct and whether the accessories are complete.
The purchased SIM card requires GPRS and caller ID functions (only supported SIM cards: 2G
GSM, 3G WCDMA / TD-SCDMA, 4G TD-LTE),
Install the app client on the mobile terminal. For details of the client, please a sk your dealer
The barcode on the machine is used to register the user, and it must be written into the barcode of
the machine after power on! The format is as follows:
Edit the message " IMEI#barcode# " and send it to the machine, AS : imei#312345678912345#
The corresponding new serial number will be written successfully and "IMEI number write OK."
will be returned.
2、 Product function
Base station positioning Mobile client control mode ?8?5
GPRS real-time positioning tracking and monitoring ?8?5
PIR induction Intercom ?8?5
Footprints infrared trigger of human body ?8?5
Low power alarm Pick up sound ?8?5
Voice call back Motion detection alarm ?8?5
Flash key : short press to see the machine light flash and show it is idle.
Partial function description:
A. When the human body is close, it will automatically start the alarm;
B. The sensitivity is the highest in the range of 4-5m;
C. Place or paste the alarm at a certain height, with an angle range of 120 °
When have human body coming in it will start the alarm in a very short time.
3 、 Some SMS instructions:
Binding number: ALM + phone number, such as alm 755896875 1)
only one number can be bound.
2) Change upload data time: uptime # seconds, such as “ uptime# 400 ” , means the
change time is 400 seconds, the maximum value is 65555, and the default is 300 seconds;
3) Detection alarm mode - call / SMS reply: call / SMS factory default is call mode
4) Motion detection off and on: 000# / 111#
5) View machine parameter instruction - Remote restart: param# / reset#
6) Close the GPRS connection and open the connection respectively: GPS#0 / GPS#1
7) Query serial number / restore factory: IMEI / factory#
8) Change APN: APN# netname # , As " APN#cwnet# " is changed to cwnet
The above instructions are edited regardless of case and sent to the machine .
4 、 Client operation instructions
1.1 app download and administrator account registration
1. Download and install app
Use smartphone to scan QR code to download app - prevent loss, open it in browser
and download it again. The following is the domestic QR code
Note: if wechat or QQ scanning QR code cannot be downloaded, please use other
scanning tools to scan and download, or Android phones can search and download in
the Android Market such as Tencent app, and apple phones can search and download
in app store to prevent loss
New User Registration. 1.
After the download is completed, the new user clic ks on the
registration icon and follows the prompts to register the
account. Note: Parents' mobile phone numbers are generally
required for registered accounts.
6. Bind A9 of this product
After the account registration is successful, bind A9 to the account, and bind A9 of
this product with the bar code on the body.
Note: Only one account can be registered for a mobile phone number, and multiple
locators A9 can be bound to one account.
One locator A9 can also be bound by multiple accounts,
There are three ways to add group members:
You can manually enter the anti-loss number, mobile phone number or device ID to
add it.
You can also scan the other party's two-dimensional code to add it.
The two-dimensional code of that opposite scan group is added,
Main interface:
Running FangZouDiu APP, Once you login , you will see the following main interface, it
automatically show the current location of the members of the group:
Within it , you can do:
1) immediate location: update the current location informatio n
2) monitoring number: set the center number for monitoring
3)Positioning frequency: set the interval time of upload
4) Low-voltage alarm: turn on or off low-voltage alarm . etc
5 ) Electronic fence : after the electronic fence is set in the group setti ng
of the same machine, the locator will be considerate to enter and leave the
fence. Reminder to tell you.
click on the drop-down red square circle and a function list will A
appear. the red circle is part of the temporarily supported functions
Pic 1 Pic 2
B Click the circle to add equipment the fllowing :
Pic 1 Pic 2
Click "Add Member" and select "Locator", then scan the two-
dimensional code or add manually. If you enter it manually, you will only
enter the serial number of the 16-bit bar code pasted outside the fuselage.
VI. Troubleshooting
The machine cannot be connected to the server when it is started for the first time,
and the app sends instructions to show that the equipment is not connected to the
network. Please check:
1) Is the SIM in the machine TD-CDMA network, such as telecom does
not support it.
2) The SIM card in the machine must be compatible with 2 G data flow to
enable data flow. Currently, the machi ne Only 2g of data traffic can be
used.
3) Whether the server parameters, namely IP and port, and id are correct
or not, must ensure that the id bar code affixed by the machine is
consistent with the ID written by the machine at the factory. The machine
must be installed with a card and turned on. If you do not understand, you
can ask the agent.
4) There are two situations when the registration is not possible: A.
Prompt that the equipment number does not exist or the equipment
number is already registered and must be handled by an agent; B prompt
that the account number has been registered, that is, the account number
has been registered, and the customer only needs to change an account
number to register again.

Features:
Infrared sensor alarm. When people get close to the alarm, it will detect the signal and activate the alarm.
Insert SIM card into the device for controlling. (GSM SIM card is recommended)
Adopts advanced wireless communication technology.
Audio monitoring, clear voice. After binding this device with your phone, it will call you when it alarms.
Positioning. You can send message "DW" to SIM card number, and if the alarm is moved, it can send you its new address to you.
Remote control. You can turn on or turn off its sensing function by sending message to its SIM card number.
Mini size and ultra light weight.
Simple operation, stable performance and easy installation.
Low power consumption, long standby time and accurate alarming.
Suitable for use in home, children's bedroom, office, hospital, car, storage, etc.

Specifications:
Color: black

Features:
Infrared sensor alarm. When people get close to the alarm, it will detect the signal and activate the alarm.
Insert SIM card into the device for controlling. (GSM SIM card is recommended)
Adopts advanced wireless communication technology.
Audio monitoring, clear voice. After binding this device with your phone, it will call you when it alarms.
Positioning. You can send message "DW" to SIM card number, and if the alarm is moved, it can send you its new address to you.
Remote control. You can turn on or turn off its sensing function by sending message to its SIM card number.
Mini size and ultra light weight.
Simple operation, stable performance and easy installation.
Low power consumption, long standby time and accurate alarming.
Suitable for use in home, children's bedroom, office, hospital, car, storage, etc.

Specifications:
Color: black

Features:
Infrared sensor alarm. When people get close to the alarm, it will detect the signal and activate the alarm.
Insert SIM card into the device for controlling. (GSM SIM card is recommended)
Adopts advanced wireless communication technology.
Audio monitoring, clear voice. After binding this device with your phone, it will call you when it alarms.
Positioning. You can send message "DW" to SIM card number, and if the alarm is moved, it can send you its new address to you.
Remote control. You can turn on or turn off its sensing function by sending message to its SIM card number.
Mini size and ultra light weight.
Simple operation, stable performance and easy installation.
Low power consumption, long standby time and accurate alarming.
Suitable for use in home, children's bedroom, office, hospital, car, storage, etc.

Specifications:
Color: black