100M 100m optical fiber transceiver 2U board card monitoring transceiver converter FMC-FEC14-20SC

 

FMC-FEC系列

 

10/100M百兆2U插卡式光纤收发器

 

 

产品描述：

 

FMC-FEC系列是百兆快速以太网光纤收发器,将来自双绞线100BASE-TX网线的传输信号转换为100BASE-FX光纤信号。它将网络数据传输距离扩展到超过100米限制距离，通过单模光纤可高达120公里。100BaseTX-FX收发器通常用于长距离连接诸如100BASE-TX集线器之类的快速以太网设备。

 

 

该光纤收发器支持单纤或双纤供选择SFP接口，六个LED指示灯， 方便诊断和监测收发器工作状态，电源PWR 。以太网双绞线连接(TPLNK)、光纤连接(FXLNK)、全/半双工(DUP)、LFP功能、10M/100M数据速率(100M)。可以自动配置全双工或半双工和数据速率操作。

 

具有结构紧凑、成本效益高、耗散性低、可靠性高、稳定性好等特点。它专为使用于16槽2U机架而设计的收发器，实现集中式管理。

 

 

 

产品特征：

 

·支持IEEE 802.3 10 Bas-T、802.3u、100BASE-TX、100BASE-FX协议

 

·支持IEEE802.1Q VLAN标签，生成树标准。

 

·10/100 M自动谈判

 

·自动半/全双工数据模式

 

·自动MDI/MDIX提供自动交叉

 

·传输距离可达120公里

 

·支持多达1600字节的超大数据包

 

·支持热插拔

 

·使用在19英寸2U 16槽机架上

 

·SC、LC、FC、ST光纤连接器可供选择

 

·TX/RX双纤

 

 

 

 

 

产品规格：

 

参数	说明
速率 (Mbps)	10/100
工作波长 (nm)	850，1310, 1550 or CWDM
光纤类别(μm)	单模 9/125 或多模50/125, 62.5/125
连接头类别	SC、FC、LC、ST可选
最大传输距离 (km)	20,40,60,80,100,120可选
电源	5V
工作温度	-10～70℃
存储温度	-40～80℃
湿度	5% to 90% 非凝结

 

 

 

FMC-FE-E系列产品采购指引

 

FMC-FE14-C20SC	10/100/M 单模1310nm 20公里，2U插卡式，双SC接头
FMC-FE14-C60SC	10/100/M 单模1310nm 60公里，2U插卡式，双SC接头
FMC-FE14-C80SC	10/100/M 单模1550nm 80公里，2U插卡式，双SC接头
FMC-FE14-C100SC	10/100/M 单模1550nm 100公里，2U插卡式，双SC接头
FMC-FE14-C120SC	10/100/M 单模1550nm 120公里，2U插卡式，双SC接头

 

 

 

产品性能参数：

 

型号	波长 (nm)	发射功率 (dB)	接收灵敏度(dB)	饱和功率(dB)	传输距离 (Km)	光损耗 (dB/Km)
FMC-FE14-C20SC	1310	-12~-15	-38	≥-12	0~25	0.4
FMC-FE14-C60SC	1310	-8~-12	-38	≥-8	0~60	0.4
FMC-FE14-C80SC	1550	-3~-5	-38	≥-3	0~80	0.25
FMC-FE14-C100SC	1550	-1~-3	-38	≥-1	0~100	0.25
FMC-FE14-C120SC	1550	+3~-1	-38	≥-1	0~120	0.25

 

 

 

LED 指示灯

 

LED 灯	状态	描述
Link/Act	亮	收发器连接成功
	闪烁	正在传输数据
FDX	亮	全双工模式
	关	半双工模式
PWR	亮	电源开启
TX	亮	TX已连接
FX	亮	FX已连接

 

 

 

 

 

FMC-FE-E serial

 

10/100M Dual Fibers Media converter, External power supply

 

 

 

Product Description

 

The FMC-FEC series TX to FX Network media Converter is a Fast Ethernet media converter that

 

translates transmission signals from a twisted-pair 100BASE-TX cable to 100BASE-FX fiber optic cable. It extends network data transmission distances beyond the 100 meters limitation distances of copper

 

wire up to 120 kilometers by using Single Mode fiber optic model. The 100BaseTX-to-FX Media Converter is typically used to connect Fast Ethernet devices, such as 100Base-TX Hubs, at long distance. The 100BaseTX-to-FX Media Converter will connect servers or workstations located up to 100 kilometers from each other.

 

 

 

The converter is single core fiber optic connector (transmitting-TX and Receiving -RX are in one fiber cable), and one RJ-45 Jacks, external or internal power supply for option. Six LED indicators are built –in for easy diagnosing and monitoring the status of Power(PWR), Unshielded Twisted Paired activity link(Link/ACT), Fiber activity link(Link/ACT), Full/Half duplex(FDX), Fiber link up(FX), 100Base-TX link up (100) data rate. It can be configured automatically for full duplex or half duplex and data rate operation. It is compact, cost-effective, low dissipative, high reliable and stable. It is support using in 16solts chassis rack.

 

 

 

Features

 

• Supports IEEE 802.3 10 Base-T, 802.3u,100Base-TX, 100Base-FX protocols

 

• Support IEEE 802.1Q VLAN TAG, Spanning Tree standard.

 

• Auto Negotiate 10/100M

 

• Auto Half/Full Duplex data mode

 

• Auto MDI/MDIX provides automatic cross

 

• Transmission distance up to 120km.

 

• TX/RX Dual fibers.

 

• Support over-sized packets up to 1600Bytes.

 

• support use in 2U 19inch 16solts chassis rack.

 

• Support IEEE802.1p QOS PRI protocol

 

• SC, LC, FC , ST fiber connector for option

 

 

 

NO.	Function	Status	Specification	Default
SW1-1	TP_FORCE Ethernet port auto-negotiation	ON	Disable	OFF
		OFF	Enable
SW1-2	SPEED Ethernet port  rate	ON	10M	OFF
		OFF	100M
SW1-3	DUPLEX Ethernet port duplex mode	ON	Half duplex	OFF
		OFF	Full duplex
SW1-4	FX_FULL Optical port duplex mode	ON	Half duplex	OFF
		OFF	Full duplex
SW1-5	LFP  Link-loss detect	ON	Enable	OFF
		OFF	Disable
SW1-6 SW1-7	D_WIRE F_FWD Transmission mode	See appendix		OFF
SW1-8	X_EN Support IEEE 802.3X	ON	Nonsupport	OFF
		OFF	Support

 

 

产品应用Application:

......................................................................................................................................................................................................................................................................................................................................