MASTECH Huayi MS5902 circuit breaker detector socket line test find function for electricians

功能描述：

l        断路器查找功能    自动调整灵敏度，快速精确寻找到目标断路器

l        插座测试功能      测试三脚插座连接是否正确

                      ※地线开路

※地线与火线反接

※零线与火线反接

※零线开路

※正确

l        蜂鸣告警和灯光提示

l        手电筒照明功能   

l        电池低压告警

l        工作电压          AC220V/50HZ  

l        安全等级          IEC1010-1 CATII 600V（仅MS5902-T）

l        适用于家庭，办公室，厂房电网改造，安装和验收工程　

The task of Circuit Breaker Finder/Socket Tester (MS5902)is finds correct breaker or fuse and test socket.You will have annoyance no more for locating the correct circuit breaker supplying power to an AC outlet or lighting fixture.

Warning:

Please caution extremely when use the MS5902 in the gigantic circuit breaker ark. Don't use when voltage more than 120V/230V AC.You can turn on the flashlight in the dark surroundings.

Features:

•   Automatically and quickly finds correct breaker or fuse.

•  Quickly and easy identifies conditions of circuit socket.

•  MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC

•   Operating temperature: 0 ~ 50℃ 

Operation:  Locating a Circuit Breaker or Fuse

•   Keep the pillar at left on the MS5902-T

•    Plug the MS5902-T into the receptacle.if there is a candescent light

    fixture,please install a socket adapter before make sure the switch is

    OFF.then plug the MS5902-T into the socket adapter,turn the switch on at

    one time.(Socket adapter need purchase additional)

•   Go to the circuit breaker panel box.

•   Turn the MS5902-R on,the red LED is light.

•   Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse.

•  Slide the chapiter of the MS5902-R down each breaker along both sides of 

    the panel .Then the MS5902-R will beep frequently as it denote the

    relative signal strength.

•  Move the MS5902-R down each breaker once more. On the third pass,

    the MS5902-R will beep ,the red LED will quench and the green LED will 

    light only at the circuit Breaker powering the MS5902-T. 

•   Push the breaker off and check that the LED on the MS5902-T in the outlet is

    off to confirm you have found the correct breaker or buse.

Test Socket   Keep the pillar at right on the MS5902-T.

 Please contradistinguish nameplate on the MS5902-T.

 Maintenance:   

•   Keep clean with a dry cloth.

• When the yellow LED is light on the MS5902-R, please unscrew and 

    remove cover, insert new 9V battery so as to the MS5902-R is well-balanced.