2 in 6 out passive amplifier speaker selection switcher speaker partition distributor comparator sound quality without loss

产品标题：

B068---2进6出功放音箱选择切换器6区域立体声扬声器分配控制器

产品功能介绍：

这款多区域立体声扬声器分配控制器系统有助于将2个放大器或家庭A/V接收器的音频信号分发到6对普通或大音量扬声器和一个连接的

耳机、扬声器区域扩展分配控制器有助于用户轻松扩展现有放大器的扬声器容量,以处理更多对扬声器

1、本装置为每个扬声器区域输出提供总共6个区域A/B功放源选择器,可从一个或两个放大器驱动多达6对扬声器。

2、每个区域都有单独的 A/B 源选择开关。 用户可以轻松分配两个功放中的其中一个,通过特定的扬声器区播放,使用前面板上的 A/B 

开关按钮即可。耳机输出有独立的音量控制。

3、内置先进的保护电路,确保对已连接的放大器的安全负载。耳机接口提供立体声耳机输出,用于个人聆听信号监控。 

支持4至16欧姆阻抗的立体声扬声器。 分区域开关控制,可立即打开或关闭分区的输出。

4、可接受高达12 AWG 扬声器线。与所有类型的放大器和扬声器完全兼容。每个通道200W功率处理，8欧姆扬声器负载。

5、输入和输出手动选择切换，直插直用，切换信号稳定，通道之间不会产生另何干拢或噪声

6、紧凑的设计坚固的金属外壳，安装简单，产品无需外部电源

7、安装简单：输入输出香蕉头接口即插即用方便安装，即可享受不一样的音频体验

产品参数：

材质：金属铁外壳

颜色：黑色

兼容所有类型的功率放大器和扬声器。

输入/输出通过端子口接受重型扬声器线或扬声器引脚线可接受高达12 AWG 扬声器线。

将功率放大器接在放大器A和B位置。

将扬声器分别接在扬声器1-2-3-4-5-6位置。

打开你的功率放大器立体声设备，产品无需外部电源。

耳机接口6.35mm提供立体声耳机连接用于个人聆听信号监控。

输入：2组输入(香蕉插头)

输出：6组输出(香蕉插头)

功率：每通道支持200W

金属材料，精钢外壳，紧凑的尺寸适合任何系统。

通道功率：每个通道支持功率最高达300W 。

单品净重：1.28 kg

含包装后重量：1.49 kg

产品尺寸：长320 mm X 宽110 mm X 高62 mm

包装尺寸：长347 mm X 宽190 mm X 高73 mm

发货清单：

1 X 6区立体声功放扬声器分配控制器

产品标题：

2 In 6 Out Power Amplifier Speaker Selector Switcher 6 Region Stereo Speaker Distribution Controller

功能介绍：

Product features:

This multi-area stereo speaker distribution controller system helps distribute audio signals from 2 amplifiers or home A/V receivers to 6 pairs of regular or high-volume speakers and one。

The connected headphone, speaker area expansion distribution controller helps users easily expand the speaker capacity of the existing amplifier to handle more pairs of speakers。

1、The device provides A total of 6 regional A/B power amplifier source selectors for each speaker region output, which can drive up to 6 pairs of speakers from one or two amplifiers。

2、Each area has A separate A/B source selection switch. Users can easily assign one of the two amplifiers to play through a specific speaker area,

Use the A/B switch button on the front panel. The headphone output has a separate volume control。

3、Built-in advanced protection circuit to ensure the safety of the connected amplifier load. The headphone jack provides stereo headphone output for personal listening signal monitoring.

Stereo speakers with impedance from 

4 to 16 ohms. Subzone switch control that instantly turns the output of the partition on or off。

4、Can accept up to 12 AWG speaker cable. Fully compatible with all types of amplifiers and speakers. 200W power processing per channel, 8 ohms speaker load。

5、Input and output manual selection switch, direct insertion and direct use, switching signal is stable, there is no other interference or noise between channels。

6、Compact design solid metal shell, easy installation, the product does not need external power supply。

7、Simple installation: input and output banana head interface plug and play easy installation, you can enjoy a different audio experience。

产品参数：

Product Parameters:

Compatible with all types of power amplifiers and speakers.

Input/output accepts heavy speaker wire through the terminal port or speaker pin wire accepts up to 12 AWG speaker wire.

Connect the power amplifier to amplifiers A and B.

Connect speakers to speakers 1-2-3-4-5-6.

Turn on your power amplifier stereo device and the product requires no external power supply.

Headphone port 6.35mm provides stereo headphone connection for personal listening signal monitoring.

Input: 2 sets of input (banana plug).

Output: 6 sets of output (banana plug).

Power: 300W per channel.

Metal material, steel casing, compact size to fit any system.

Channel power: Each channel supports power up to 300W.

Net weight: 1.28kg.

Weight including package: 1.49kg.

Product size: Length 320 mm X width 110 mm X height 62 mm.

Package size: L 347 mm X W 190 mm X H 73 mm.

发货清单：

Shipping list:

1 X 6 Zone Stereo Power Amplifier Speaker Distribution Controller