Welcome to GoBozor
FJY Hot Sale 8*8RGB64 Bit high quality WS2812BLED Module ws2812s Compatible Arduino
0.0
0 sold.
Minimum quantity is: 1 pcs
Price section
Price from:
366,761 so'm
366,761 so'm
8888 availableGuaranteed delivery time
If we are 45 days late, you will receive your order for free. More details
Always in touch with you
We will answer any questions every day.
Secure payment in a convenient way
We will accept payment by any card
BNPL available
select product
select product
Select payment by installments when placing your order. The final installment cost is calculated at checkout.
FJY Hot Sale 8*8RGB64 Bit high quality WS2812BLED Module ws2812s Compatible Arduino
About the product
Characteristic
- Brand
Other
- Chip manufacturer
Universal model
- Motherboard architecture
Universal model
- Hard drive interface
Universal model
Description
详情不清楚的，请咨询客服！！谢谢！
欢迎咨询，客服长期在线！！
| 产品简介 |
名称：WS2812全彩环形LED模块（64位灯珠）
尺寸：7.5*7.5cm
芯片：WS2811（内置于LED）
LED：5050封装RGB全彩高亮
电压：5V
端口：数字
平台：Arduino 单片机
控制方式：内置控制芯片，只需一个IO口即可控制
| 实物拍摄 |
| 示例代码 |
// NeoPixel Ring simple sketch (c) 2013 Shae Erisson
// released under the GPLv3 license to match the rest of the AdaFruit NeoPixel library
#include
#include
// Which pin on the Arduino is connected to the NeoPixels?
// On a Trinket or Gemma we suggest changing this to 1
#define PIN 6
// How many NeoPixels are attached to the Arduino?
#define NUMPIXELS 32
// When we setup the NeoPixel library, we tell it how many pixels, and which pin to use to send signals.
// Note that for older NeoPixel strips you might need to change the third parameter--see the strandtest
// example for more information on possible values.
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
int delayval = 500; // delay for half a second
void setup() {
// This is for Trinket 5V 16MHz, you can remove these three lines if you are not using a Trinket
#if defined (__AVR_ATtiny85__)
if (F_CPU == 16000000) clock_prescale_set(clock_div_1);
#endif
// End of trinket special code
pixels.begin(); // This initializes the NeoPixel library.
}
void loop() {
// For a set of NeoPixels the first NeoPixel is 0, second is 1, all the way up to the count of pixels minus one.
for(int i=0;i
// pixels.Color takes RGB values, from 0,0,0 up to 255,255,255
pixels.setPixelColor(i, pixels.Color(0,150,0)); // Moderately bright green color.
pixels.show(); // This sends the updated pixel color to the hardware.
delay(delayval); // Delay for a period of time (in milliseconds).
}
}
Characters
Properties
- Brand
Other
- Chip manufacturer
Universal model
- Motherboard architecture
Universal model
- Hard drive interface
Universal model
Description
详情不清楚的，请咨询客服！！谢谢！
欢迎咨询，客服长期在线！！
| 产品简介 |
名称：WS2812全彩环形LED模块（64位灯珠）
尺寸：7.5*7.5cm
芯片：WS2811（内置于LED）
LED：5050封装RGB全彩高亮
电压：5V
端口：数字
平台：Arduino 单片机
控制方式：内置控制芯片，只需一个IO口即可控制
| 实物拍摄 |
| 示例代码 |
// NeoPixel Ring simple sketch (c) 2013 Shae Erisson
// released under the GPLv3 license to match the rest of the AdaFruit NeoPixel library
#include
#include
// Which pin on the Arduino is connected to the NeoPixels?
// On a Trinket or Gemma we suggest changing this to 1
#define PIN 6
// How many NeoPixels are attached to the Arduino?
#define NUMPIXELS 32
// When we setup the NeoPixel library, we tell it how many pixels, and which pin to use to send signals.
// Note that for older NeoPixel strips you might need to change the third parameter--see the strandtest
// example for more information on possible values.
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
int delayval = 500; // delay for half a second
void setup() {
// This is for Trinket 5V 16MHz, you can remove these three lines if you are not using a Trinket
#if defined (__AVR_ATtiny85__)
if (F_CPU == 16000000) clock_prescale_set(clock_div_1);
#endif
// End of trinket special code
pixels.begin(); // This initializes the NeoPixel library.
}
void loop() {
// For a set of NeoPixels the first NeoPixel is 0, second is 1, all the way up to the count of pixels minus one.
for(int i=0;i
// pixels.Color takes RGB values, from 0,0,0 up to 255,255,255
pixels.setPixelColor(i, pixels.Color(0,150,0)); // Moderately bright green color.
pixels.show(); // This sends the updated pixel color to the hardware.
delay(delayval); // Delay for a period of time (in milliseconds).
}
}