Welcome to GoBozor
Weather radar station lightning rod installation radar position lightning rod empty pipe radar glass fiber reinforced plastic lightning rod
Price section
Price from:
4,137,813 so'm
Guaranteed delivery time
If we are 45 days late, you will receive your order for free. More details
Always in touch with you
We will answer any questions every day.
Secure payment in a convenient way
We will accept payment by any card
BNPL available
About the product
Characteristic
- Origin
Jiangsu
- Type
Lightning protection needle
- Series
Fiberglass lightning protection needle
- Is it imported?
No
- Processing and customization
Yes
Description
1.避雷针的装配和安装是施工现场进行的，装配时，在接闪器装入玻钢管之前，先将长1米截面积70mm的铜线一端接线鼻子后,与接闪器下端的螺纹用M10/12的螺栓连接并焊接在基座戒底板(用户自备)上,注意：基座或底板的安装螺栓必须与建筑钢筋进行焊接;
2.先将接闪器下部的M36和玻钢管(一)的M36内壁的螺纹抹上粘接剂(粘接剂由低分子650聚酰胺树脂和环氧树脂混合而成),然名旋入,待固化;以此类推待整个避雷针装配好,固化名(在此期间可调节避雷针的直线度不大于10mm),(固化时间按粘接剂上规定的时间),在每节粘接处打孔,攻丝M8(深度为打穿两管壁厚),紧定螺钉尺寸为M8x25,螺钉旋入名,再在螺钉头部抹上粘接剂;
3.用塔吊将已组装好的玻钢针放置在法兰底座的支柱内,灌上B-666硅橡胶,吋时紧固其上的8颗定位螺钉,以调整垂直度(目测)使其满足要求,再将其固定;
4.避雷针的高度按用户要求定制。
Characters
Properties
- Origin
Jiangsu
- Type
Lightning protection needle
- Series
Fiberglass lightning protection needle
- Is it imported?
No
Description
1.避雷针的装配和安装是施工现场进行的，装配时，在接闪器装入玻钢管之前，先将长1米截面积70mm的铜线一端接线鼻子后,与接闪器下端的螺纹用M10/12的螺栓连接并焊接在基座戒底板(用户自备)上,注意：基座或底板的安装螺栓必须与建筑钢筋进行焊接;
2.先将接闪器下部的M36和玻钢管(一)的M36内壁的螺纹抹上粘接剂(粘接剂由低分子650聚酰胺树脂和环氧树脂混合而成),然名旋入,待固化;以此类推待整个避雷针装配好,固化名(在此期间可调节避雷针的直线度不大于10mm),(固化时间按粘接剂上规定的时间),在每节粘接处打孔,攻丝M8(深度为打穿两管壁厚),紧定螺钉尺寸为M8x25,螺钉旋入名,再在螺钉头部抹上粘接剂;
3.用塔吊将已组装好的玻钢针放置在法兰底座的支柱内,灌上B-666硅橡胶,吋时紧固其上的8颗定位螺钉,以调整垂直度(目测)使其满足要求,再将其固定;
4.避雷针的高度按用户要求定制。