Welcome to GoBozor
Price from:
65,829 so'm
Guaranteed delivery time
If we are 45 days late, you will receive your order for free. More details
Always in touch with you
We will answer any questions every day.
Secure payment in a convenient way
We will accept payment by any card
BNPL available
About the product
Characteristic
Fiberglass
Shenzhen
0
1021
0
Treasure sun
33.3*22.5
H1021
No
H1021
0
0
Yes
Yes
Description
本公司所售产品为出国外定制产品,国内使用者如是在国内使用请勿下单.
本公司所标价产品都是不包括税点,开票另加税点
无线同步太阳能道钉灯黄闪灯控制板.可实现一公里内多个太阳能道钉灯同时闪烁.方便引导高速出口标识.适用于3.2V3.7V电池.5V太阳能板.
跨境包裹透明密封袋装重量:10g.中英文说明书无电池 无磁性
参数:
请先连接电池。然后连接LED。 最后连接太阳能电池板
应用电池电压:3.2V3.7V锂电池(需要电池加好保护板)
太阳能板适用电压:5V <0.5W
LED:<3V发光二极管.8颗或10颗.
亮灯模式:每分钟闪50次/60次
同步闪烁模式:2.4G无线同步
建议安装距离:建议每隔20米的距离安装一个。
注意:如果是安装在金属铁壳内.安装距离需小于1米.否则无法同步.
Please connect the battery first. Then connect the LED. Finally connect the solar panel
Application battery voltage: 3.2V3.7V lithium battery (requires battery protection board)
Applicable voltage for solar panels: 5V<0.5W
LED:
Lighting mode: flashing 50 times/60 times per minute
Synchronous flashing mode: 2.4G wireless synchronization
Suggested installation distance: It is recommended to install one every 20 meters.
Attention: If installed inside a metal shell, the installation distance must be less than 1 meter. Otherwise, synchronization cannot be achieved
Characters
Fiberglass
Shenzhen
0
1021
Description
本公司所售产品为出国外定制产品,国内使用者如是在国内使用请勿下单.
本公司所标价产品都是不包括税点,开票另加税点
无线同步太阳能道钉灯黄闪灯控制板.可实现一公里内多个太阳能道钉灯同时闪烁.方便引导高速出口标识.适用于3.2V3.7V电池.5V太阳能板.
跨境包裹透明密封袋装重量:10g.中英文说明书无电池 无磁性
参数:
请先连接电池。然后连接LED。 最后连接太阳能电池板
应用电池电压:3.2V3.7V锂电池(需要电池加好保护板)
太阳能板适用电压:5V <0.5W
LED:<3V发光二极管.8颗或10颗.
亮灯模式:每分钟闪50次/60次
同步闪烁模式:2.4G无线同步
建议安装距离:建议每隔20米的距离安装一个。
注意:如果是安装在金属铁壳内.安装距离需小于1米.否则无法同步.
Please connect the battery first. Then connect the LED. Finally connect the solar panel
Application battery voltage: 3.2V3.7V lithium battery (requires battery protection board)
Applicable voltage for solar panels: 5V<0.5W
LED:
Lighting mode: flashing 50 times/60 times per minute
Synchronous flashing mode: 2.4G wireless synchronization
Suggested installation distance: It is recommended to install one every 20 meters.
Attention: If installed inside a metal shell, the installation distance must be less than 1 meter. Otherwise, synchronization cannot be achieved