GoBozor ga xush kelibsiz
LG чип УФ-ультрафиолетовый светодиодный источник света XPE 3535 365nm УФ-ультрафиолетовый свет высокой мощности светодиодный шарик
Price section
dan boshlab
32 915 so'm
Kafolatlangan yetkazib berish muddati
Agar biz 45 kun kechiksak, buyurtmani bepul olasiz. Batafsil
Har doim siz bilan aloqada
Biz har kuni savollarga har qanday savollarga javob beramiz.
To'lovni qulay usulda xavfsiz qiling
Biz to'lovlarni turli xil usullarda qabul qilamiz.
Bo'lib to'lash mavjud
Mahsulot haqida
Xususiyatlar
- Рабочий ток
700
- Рабочее напряжение
3.4-4.0
- мощность
3
- Бренд
MAXLITE/Шэнгуан
- модель
CL-P04U64X3XX1XXX
- Материал брекета
медь
- Импортировано ли оно?
Нет
- Термостойкость
≤10
- Световой угол
120
- марка чипа
LG
- Ускорение старения за 96 часов.
98
- ESD (режим человеческого тела)
2000
- 1000 часов планового старения
98
Tavsif
| 公司简介 |
|
深圳市盛光科技有限公司专业从事大功率LED光源及其应用产品开发和生产。公司集设计开发、生产、销售、及售后服务于一体。 我司本着“诚信为本，一言九鼎“的企业精神，坚守“客户至上、产品至上、服务至上”的理念，专注产品的质量，力求以最低的价格向广大客户提供最高质量的产品。 主要产品有大功率0.5W、1W、2W、3W、5W、6W、9W、10W、15W、20W、30W、40W、50W、60W、80W、100W、300W等；产品覆盖正白、暖白、冷白、红光、黄光、蓝光、绿光、橙光、粉色光、紫光、紫外、红外、双色、RGB三色、及COB光源等。产品广泛应用于路灯、工矿灯、泛光灯、投射灯、隧道灯、植物生长灯、庭院灯、舞台灯、天花灯、壁灯、筒灯、LED手电、钓鱼灯、台灯、头灯、大功率日光灯、洗墙灯、地坪灯、水底灯、轮廓装饰灯、广告招牌、射灯、灯杯、球泡等。 作为直接生产厂家，我司批量供应高亮低衰减大功率LED发光二极管，全系列产品均采用正品优质芯片及美国道康宁硅胶封装, 相比市场同类产品质更优价更良。 盛光科技以高性价比的产品，与广大客户携手共进，开拓未来，共创辉煌。 |
| 产品光电参数(Electrical/Optical Characteristics) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| 封装尺寸规格(Package Dimension) |
 |
| 光电曲线(Typical Electro-Optical Characteristics Curves) |
    |
| 产品包装(Packing) |
|
|
| 焊接和使用注意事项(TIPS） | ||||||||||||
|
Please read the following notes before using the product: 1.Over-current-proof Customer must apply resistors forprotection, otherwise slight voltage shift will cause big current change(Burn out will happen). 2.Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30°Cor less and 80%RH or less. 2.3 The LEDs should be used with in a year. 2.4 After opening the package, the LEDs should be kept at 30°Cor less and 60%RH or less. 2.5 The LEDs should be used within 168 hours(7days) after opening the package. 2.6 If the moisture adsorbent material has fabled away or the LEDs have exceeded the storage time,baking treatment should be performed using the following conditions. Baking treatment: 60±5°Cfor24hours. 3.SolderingCondition When soldering, for Lamp without stopper type and must be leave a minimum of 3mm clearance from the base of the lens to the soldering point. To avoided the Epoxy climb upon lead frame and was impact to non-soldering problem, dipping the lens into the solder must be avoided. Do not apply any external stress to the lead frame during soldering while the LED is at high temperature. Recommendedsolderingconditions:
Note:Excessive soldering temperature and / or time might result in deformation of the LED lens or catastrophicfailureof the LED. 4.SolderingIron Each terminal is to go to the tip of soldering iron temperaturel ess than 260°Cfor 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, ad ouble-head soldering iron should be used(as below figure). It should be confirmed before hand whether the characteristics of the LEDs will or will not be damaged by repairing.
6.CautioninESD Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. |
||||||||||||
Barcha xususiyatlar
Xususiyatlari
- Рабочий ток
700
- Рабочее напряжение
3.4-4.0
- мощность
3
- Бренд
MAXLITE/Шэнгуан
Tavsif
| 公司简介 |
|
深圳市盛光科技有限公司专业从事大功率LED光源及其应用产品开发和生产。公司集设计开发、生产、销售、及售后服务于一体。 我司本着“诚信为本，一言九鼎“的企业精神，坚守“客户至上、产品至上、服务至上”的理念，专注产品的质量，力求以最低的价格向广大客户提供最高质量的产品。 主要产品有大功率0.5W、1W、2W、3W、5W、6W、9W、10W、15W、20W、30W、40W、50W、60W、80W、100W、300W等；产品覆盖正白、暖白、冷白、红光、黄光、蓝光、绿光、橙光、粉色光、紫光、紫外、红外、双色、RGB三色、及COB光源等。产品广泛应用于路灯、工矿灯、泛光灯、投射灯、隧道灯、植物生长灯、庭院灯、舞台灯、天花灯、壁灯、筒灯、LED手电、钓鱼灯、台灯、头灯、大功率日光灯、洗墙灯、地坪灯、水底灯、轮廓装饰灯、广告招牌、射灯、灯杯、球泡等。 作为直接生产厂家，我司批量供应高亮低衰减大功率LED发光二极管，全系列产品均采用正品优质芯片及美国道康宁硅胶封装, 相比市场同类产品质更优价更良。 盛光科技以高性价比的产品，与广大客户携手共进，开拓未来，共创辉煌。 |
| 产品光电参数(Electrical/Optical Characteristics) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| 封装尺寸规格(Package Dimension) |
|
| 光电曲线(Typical Electro-Optical Characteristics Curves) |
|
| 产品包装(Packing) |
|
|
| 焊接和使用注意事项(TIPS） | ||||||||||||
|
Please read the following notes before using the product: 1.Over-current-proof Customer must apply resistors forprotection, otherwise slight voltage shift will cause big current change(Burn out will happen). 2.Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30°Cor less and 80%RH or less. 2.3 The LEDs should be used with in a year. 2.4 After opening the package, the LEDs should be kept at 30°Cor less and 60%RH or less. 2.5 The LEDs should be used within 168 hours(7days) after opening the package. 2.6 If the moisture adsorbent material has fabled away or the LEDs have exceeded the storage time,baking treatment should be performed using the following conditions. Baking treatment: 60±5°Cfor24hours. 3.SolderingCondition When soldering, for Lamp without stopper type and must be leave a minimum of 3mm clearance from the base of the lens to the soldering point. To avoided the Epoxy climb upon lead frame and was impact to non-soldering problem, dipping the lens into the solder must be avoided. Do not apply any external stress to the lead frame during soldering while the LED is at high temperature. Recommendedsolderingconditions:
Note:Excessive soldering temperature and / or time might result in deformation of the LED lens or catastrophicfailureof the LED. 4.SolderingIron Each terminal is to go to the tip of soldering iron temperaturel ess than 260°Cfor 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, ad ouble-head soldering iron should be used(as below figure). It should be confirmed before hand whether the characteristics of the LEDs will or will not be damaged by repairing.
6.CautioninESD Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. |
||||||||||||