Инструмент для установки инструмента для гравировки нефрита трансграничного снабжения с ЧПУ центр высокоточный инструмент по оси Z Блок настройки инструмента для гравировального станка с ЧПУ

本店商品为跨境货源，适销的下游平台，以及地区，如速卖通、亚马逊、amazon、ebay、wish、AE、lazada、跨境、Aliexpress、ins、独立站。俄罗斯、东南亚、非洲、南美等。 支持一件代发。大量现货当天发，时效有保障。 

Jade carving knife instrument using environmentally friendly recyclable raw materials set I light 5 simple installation I meter

Output mode: B: NC (normally closed)

Protection tube: IP67

Repeatability: 0.001mm

Stroke: 8mm

Protection structure: IP67 waterproof

Material of contact part: soft and hard combination

Protection tube: 1m long bending radius R25

Contact force: 1.5N

Shell material: grinding 4S

Cable: 1.5 meters, oil-resistant 4-core

Precautions for the use of the tool setter

1. The stroke of the tool setter cannot be exceeded during contact, otherwise the tool will easily damage the tool setter (stroke is 5mm)

2. When touching the contact surface of the tool setter with your hands, do not let it go immediately, so as not to damage the internal structure of the tool setter and affect the efficiency and life of the tool.

3. After the tool setting is completed, the tool must be lifted vertically away from the contact surface, and do not move laterally, which may damage the tool setting instrument.

Installation Precautions:

1. The contact surface of the tool and the tool setting instrument must be vertical, and contact with the contact surface vertically downwards. Try to install the tool on the working table where there is less iron filings, so as not to affect the accuracy of the tool setting instrument.

2, the rated voltage range of the use of voltage control in DC10-30V, current below 20mA, the use of temperature range of -25℃C-70℃, the use of better effect.

3, the tool diameter of the knife control in 20mm below, the knife speed should be controlled in 50-200mm/min tool center should fall in the center of the knife surface.

4. When using the air blowing energy, the outer diameter of the trachea is 6mm and the inner diameter is 4-5mm. When using, attention should be paid to hygiene and the iron dust attached to the contact surface should be cleaned

Description of scope of use

Various CNC engraving machines, engraving and milling machines, jade engraving machines, woodworking cutting machines, etc. from Jiatie, Beijing Jingdiao, Ncstudio, LNC Technology, SYNTEC, MACH3, etc.

Normally closed 4-wire circuit diagram

Surface anti-breaking knife touch platform

The surface is equipped with an anti-breaking knife touch platform, and a built-in paste elastic spring; the enhanced protection performance is safer for the knife setting process.

Dustproof and waterproof, durable

Dustproof and waterproof design, it can still work stably under the condition of coolant and iron flying.

High precision and strong anti-jamming

The protruding sharp corner of the tool directly touches the tip of the tool related to the processing size, detects its value and size, and outputs the signal, so it has higher accuracy than the average value obtained by the light quantity and electricity conversion using laser and energization methods.

Company information and contact information

Jinan Hongyang CNC Machinery Co., Ltd. was established in 2008. There are more than 100 employees, and the inventory area is 10,000 square meters. It is mainly engaged in engraving machine parts, including spindle motor, frequency converter, stepper motor, drive, hybrid servo motor, servo motor, Richauto dsp series controller, weihong or nc studio controller, spindle cooling water pump, lubricating oil pump, tool sensor, Limit sensors, water-cooled vacuum pumps, air-cooled vacuum pumps, power supplies, transformers, gear boxes, racks, rails, sliders or blocks, ISO30 tool clips, cable chains, spindle dust covers, vacuum cleaners and other engraving machine accessories, welcome your For inquiries.

Contact information

WeChat whatsapp mobile 8615650000988

lily @ hycncrouter. com