GoBozor ga xush kelibsiz
dan boshlab
164 573 so'm
Kafolatlangan yetkazib berish muddati
Agar biz 45 kun kechiksak, buyurtmani bepul olasiz. Batafsil
Har doim siz bilan aloqada
Biz har kuni savollarga har qanday savollarga javob beramiz.
To'lovni qulay usulda xavfsiz qiling
Biz to'lovlarni turli xil usullarda qabul qilamiz.
Bo'lib to'lash mavjud
Mahsulot haqida
Xususiyatlar
Доступен OEM
Детектор
Инструменты для ремонта автомобилей
ЭМ415ПРО
Эльфийская мышь
ЭМ415ПРО
Один год
0,45
25-01-2022
Храните три гарантии
В наличии
4-7 дней
Счет не предоставлен
Продукты + сумки + аксессуары
Да
Tavsif
INTRODUCTION
This automotive wire tracer and short finder tool is designed to identify and trace wires or cables without damaging the insulation. You can also use it in Checking Short Circuit, Locating Open Circuit,Wire Tracing, Wire Identification and so on. There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in congested or difficult areas. Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from the wire in a range of positions. However, for the best possible range the Receiver’s probe tip (black cap) should be positioned perpendicular to the wire being traced and either above or below it.
SPECIFICATIONS:
Receiver: On/Off button Test button
Probe length: 7 inch flexible probe
Sender: Tone/Off/Cont (Continuity) switch Tone/Cont (Continuity) LEDs Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts Power : 2x9V battery (6F22)
Please Note: This product set needs two batteries. Please install 9V 6F22 battery in both Receiver & Transmitter.
APPLICATION: Checking for short circuit,Locating open circuit,Wire identification, Wire tracing,etc.
PACKAGE: Inner-Carrying Case,Outer-Carton
Barcha xususiyatlar
Доступен OEM
Детектор
Инструменты для ремонта автомобилей
ЭМ415ПРО
Tavsif
INTRODUCTION
This automotive wire tracer and short finder tool is designed to identify and trace wires or cables without damaging the insulation. You can also use it in Checking Short Circuit, Locating Open Circuit,Wire Tracing, Wire Identification and so on. There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in congested or difficult areas. Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from the wire in a range of positions. However, for the best possible range the Receiver’s probe tip (black cap) should be positioned perpendicular to the wire being traced and either above or below it.
SPECIFICATIONS:
Receiver: On/Off button Test button
Probe length: 7 inch flexible probe
Sender: Tone/Off/Cont (Continuity) switch Tone/Cont (Continuity) LEDs Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts Power : 2x9V battery (6F22)
Please Note: This product set needs two batteries. Please install 9V 6F22 battery in both Receiver & Transmitter.
APPLICATION: Checking for short circuit,Locating open circuit,Wire identification, Wire tracing,etc.
PACKAGE: Inner-Carrying Case,Outer-Carton