NEO граффити WiFi интеллектуальный водяной клапан/для обнаружения потока/питание от источника питания/резервная батарея/переключатель блока/частная модель

 产品规格参数

电源：DC 5V/2A
备用电池：AA(1.2v) x 3pcs,内置镍氢电池容量2600mAh可充电电池

阀门开/关时间：12秒

铜管通径：DN20
屏幕：LCD屏
水流量上报精度：0.1gaL

流速上报精度：0.1gal/min
工作水压：0～1.3 MPa
工作温度:1 ～ 60℃(34 - 140℉)

工作湿度:1 ～ 95%RH

无线频率：2.412～2.483GHz / 5.18～5.85GHz

无线标准：IEEE 802.11/b/g/n；IEEE 802.11a/11n/11ac

蓝牙版本：蓝牙5.0

无线距离：45M

防水等级：IP66


特征描述

1. 支持蓝牙极速配网
2. 支持2.4GHz/5Ghz双频信号，无线距离45米
3. 支持本地按键开关控制
4. 支持断网蓝牙控制
5. 支持设备联动
6. 屏幕显示实时流速、流量数据
7. 支持APP远程控制阀门开关
8. 支持多单位切换gal、m³、L
9. 支持共享，可以多人查看
10. 有备用电池，备用状态下记录流量保存本地，同时可以紧急开关
11. 支持流量统计，查看总用水量

备用电池功能点

 1.备用电池，需要使用外电才能激活内电
 2.断开外电，WiFi自动关闭，无法远程APP控制，只能本地控制阀门开/关
 3.电池电压低于3.8V本地控制不了阀门开/关
   电池电压低于3.5V自动关闭阀门，阀门关上设备关机
 4.在电池模式下，开/关阀门指示灯间隔“10”秒闪烁一下
 5.在阀门打开的状态下，间隔一分钟唤醒MCU，若DP点发生变化，则唤醒WiFi上报

 Specification

Power：DC 5V/2A
Backup battery：AA(1.2v) x 3pcs Built-in Ni-MH battery with 2600mAh capacity, rechargeable battery.

Valve open/close time：12 seconds

Copper Tube Diameter：DN20
Screen：LCD
Water flow reporting accuracy：0.1gaL

Flow rate reporting accuracy：0.1gal/min
Operating water pressure：0～1.3 MPa
Working temperature:1 ～ 60℃(34 - 140℉)

Working humidity:1 ～ 95%RH

Wireless Frequency：2.412～2.483GHz / 5.18～5.85GHz

Wireless Standard：IEEE 802.11/b/g/n；IEEE 802.11a/11n/11ac

Bluetooth Version：Bluetooth 5.0

Wireless Distance：45M

Waterproof level：IP66

Feature

1. Support Bluetooth network;
2. Support 2.4GHz/5Ghz dual-frequency signal, wireless distance 45 meters;
3. Support local switch control;
4. Support Bluetooth control when disconnected from the network;
5. Support device linkage;
6. Screen display real-time flow rate, flow data;
7. Support APP remote control valve switch;
8. Support multi-unit switching gal, m³, L;
9. Support sharing, can be viewed by multiple people;
10. There is a built-in backup battery, in the backup state of the record flow to save the local, and at the same time can be emergency switching;

11. Support flow statistics, view total water consumption.

Backup battery function

 
1. Battery backup, requires external power to activate internal power;
2. When disconnecting the external power, the WiFi will automatically turn off, can not be controlled remotely by APP, only through the local control of the valve open/close;
3. Cannot locally control valve open/close when battery voltage is below 3.8V. When the battery voltage falls below 3.5V, it will automatically close the valve and shut down the machine;
4. In the mode with battery backup, the indicator light for opening/closing the valve will flash once after 10 seconds;
5. Wake up the MCU at one-minute intervals while the valve is open, and wake up the WiFi uplink if the DP point changes.