GoBozor ga xush kelibsiz
dan boshlab
1 340 088 so'm
Kafolatlangan yetkazib berish muddati
Agar biz 45 kun kechiksak, buyurtmani bepul olasiz. Batafsil
Har doim siz bilan aloqada
Biz har kuni savollarga har qanday savollarga javob beramiz.
To'lovni qulay usulda xavfsiz qiling
Biz to'lovlarni turli xil usullarda qabul qilamiz.
Bo'lib to'lash mavjud
Mahsulot haqida
Xususiyatlar
N
литиевая батарея
N
Пыленепроницаемый
SW-102
3km-5km
Ниже 1,5 км
ZX
W
N
Носильные принадлежности
N
N
N
N
Нет
Нет
0
Tavsif
Description
SURECOM SW-102 meter 125-520 Mhz Digital VHF/UHF Power & SWR Meter SW102 For Two Way Radio
Main features:
VSWR. Forward and reflected power direct readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Frequency counter function
Visible operation: Frequency,Power,SWR,FW,RW
**UHF (SO239 type) for measure handy radios**
Specification
Frequency test range: 125-520MHz
Measurable power range: 1-120W
test range of V.S.W.R: 1.00~19.9
Impedance: 50Ω
Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF)
Temperature: 0 C~60 C
Auto Power Off: 1-9 mins
Interface: (in and out)N-J Interface
Battery: 3.7V 600mAh Li-ion Battery
Charger in 5V (micro usb)
Volume: W76*H77*D35mm
Weight: <220 grams
(***Not work with digital radio***)
How to use?
Power ON/OFF: Press 2 second the [Red button] to power on & power off;
Connect the Output of your transceiver to "TX" and Antenna or dummy Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
(***must use dummy load to avoid burn tester & to get accurate result when test power)
Funtion menu display:
1) Adj. RF Forward %
2) Adj. RF Reward %
3) Adj. frequency counter time base.
4) Adj. RF Power %
5) Adj LCD dim of light
6)Adj. power off time
7)Adj. Powe test mode [0 for 1-10W hand held radio , 5 for Mobile Radio 10-100W]
Funtion Memory/ SAVE:
1. Press MENU [Blue button]
2. Press F1 [Red button] [Select 1-6 Funtion]
3. Press Blue button [- ], Yellow button [+]
4. Press the Red button for 2 seconds
5. Press the Blue button to SAVE and Exit
MENU SETTING
1: RF Level of" Forward ": [-99 to +99] %
2: RF Level of "Reverse": [-99 to +99] %
3: Freq.counter"Time Base: [-99 to +99]%
4: Finr tune RF "Power Watt Level": [-99 to +99] %
5: LCD DIM [LCD Backlight Time]: "0" is ON, "1-9" mins
6: POWER OFF: "0" is ON, "1-9" mins
Notice :SW-102 is not for DMR system
Barcha xususiyatlar
N
литиевая батарея
N
Пыленепроницаемый
Tavsif
Description
SURECOM SW-102 meter 125-520 Mhz Digital VHF/UHF Power & SWR Meter SW102 For Two Way Radio
Main features:
VSWR. Forward and reflected power direct readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Frequency counter function
Visible operation: Frequency,Power,SWR,FW,RW
**UHF (SO239 type) for measure handy radios**
Specification
Frequency test range: 125-520MHz
Measurable power range: 1-120W
test range of V.S.W.R: 1.00~19.9
Impedance: 50Ω
Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF)
Temperature: 0 C~60 C
Auto Power Off: 1-9 mins
Interface: (in and out)N-J Interface
Battery: 3.7V 600mAh Li-ion Battery
Charger in 5V (micro usb)
Volume: W76*H77*D35mm
Weight: <220 grams
(***Not work with digital radio***)
How to use?
Power ON/OFF: Press 2 second the [Red button] to power on & power off;
Connect the Output of your transceiver to "TX" and Antenna or dummy Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
(***must use dummy load to avoid burn tester & to get accurate result when test power)
Funtion menu display:
1) Adj. RF Forward %
2) Adj. RF Reward %
3) Adj. frequency counter time base.
4) Adj. RF Power %
5) Adj LCD dim of light
6)Adj. power off time
7)Adj. Powe test mode [0 for 1-10W hand held radio , 5 for Mobile Radio 10-100W]
Funtion Memory/ SAVE:
1. Press MENU [Blue button]
2. Press F1 [Red button] [Select 1-6 Funtion]
3. Press Blue button [- ], Yellow button [+]
4. Press the Red button for 2 seconds
5. Press the Blue button to SAVE and Exit
MENU SETTING
1: RF Level of" Forward ": [-99 to +99] %
2: RF Level of "Reverse": [-99 to +99] %
3: Freq.counter"Time Base: [-99 to +99]%
4: Finr tune RF "Power Watt Level": [-99 to +99] %
5: LCD DIM [LCD Backlight Time]: "0" is ON, "1-9" mins
6: POWER OFF: "0" is ON, "1-9" mins
Notice :SW-102 is not for DMR system