本店所有商品标价均为不含税价，开票须另加税点，详情询问客服

1.关于选购：本店商品均为正品，如需大量采购，可联系客服获取更低价格；    

2.关于发货：现货订单1-3天内发货，最多不超过7天；由于运费模板同时用于不同产品，运费可能出现偏差，您下单前可联系客服确认运费，本店默认发中通快递，货物较重（≥15KG）的情况下，默认发安能物流，如果快递有不到的地方，请告知，我们可以尽量转其他快递。

3.不管什么问题，只要您有任何对于本产品的疑问，联系客服，客服会给到您满意的回复。   

黑色已经升级改款请注意!!!!!!!!!!!!!!!!!!!!!如有不清楚的地方请咨询客服，谢谢！

黑色新款右刹把2P背面参考图!

黑色新款左刹把2P背面参考图

黑色新款左刹把3P背面参考图!

黑色新款右刹把3P背面参考图!

黑色新款右刹把2P详描图!

黑色新款左刹把2P详描图!

黑色新款右刹把3P详描图!

黑色新款左刹把3P详描图!

黑色新款2P实拍图！

黑色新款3P实拍图！

黑色新款2P右刹把带工具和矿物油参考图！

黑色新款2P左刹把带工具和矿物油参考图！

黑色新款3P左刹把带工具和矿物油参考图！

黑色新款3P右刹把带工具和矿物油参考图！

黑色新款2P1对带工具和矿物油参考图！

黑色新款3P1对带工具和矿物油参考图！

(品牌：NFOX)  (产地：中国东莞)  (型号：GT267)  (重量：292g/对)  (刹把类型：液压刹车把)  (适用于：5m油管的液压刹车)

(Brand: NFOX) (Origin: Dongguan, China) (Model: GT267) (Weight: 292g/pair) (Brake lever type: Hydraulic brake lever) (Applicable to: hydraulic brake with 5m tubing)

刹把主体材质为铝合金，采用锻造工艺精制而成，抛光磨砂阳极外观处理质感非常好！

The main material of the brake handle is aluminum alloy, which is refined by forging process. The appearance and texture of the polished and frosted anode are very good!

液压刹把是一体油缸结构经久耐用不漏油！

The hydraulic brake lever is an integrated oil cylinder structure, which is durable and does not leak oil!

刹车把手切断电源的方式是磁感应，断电线的接头是防水3针结构，长度大概200mm左右

The way the brake handle cuts off the power is magnetic induction, and the connector of the power cord is a waterproof 3-pin structure with a length of about 200mm.

刹车把手使用的刹车油是矿物油，兼容大多数用矿物油做制动液的刹车！

The brake fluid used in the brake lever is mineral oil, which is compatible with most brakes that use mineral oil as brake fluid!

刹车支持直径为5mm的液压油管，每个刹车都有配送安装零件4个，胶套x1，油针x1，铜套x1，油管紧固螺丝x1

The brake supports hydraulic oil pipes with a diameter of 5mm, and each brake is provided with 4 installation parts, rubber sleeve x1, oil needle x1, copper sleeve x1, oil hose fastening screw x1

刹车可以安装在直径22mm左右的车把上面

The brake can be installed on the handlebar with a diameter of about 22mm

刹车把手出厂前所有功能都已经调试为最佳状态，请尽量不要私自调整任何功能，自己调整造成的功能失效，我们不负责！

All functions of the brake handle have been adjusted to the best state before leaving the factory. Please try not to adjust any function without permission. We are not responsible for the failure of the function caused by your own adjustment!

上图是刹把相关尺寸标注,如果您还有不明白的尺寸,请联系客服,我们会为您测量相关尺寸!

The above picture is the relevant dimensions of the brake handle. If you still have any unfamiliar dimensions, please contact customer service and we will measure the relevant dimensions for you!

①测量好油管长度并剪断
②使用工具压入油针
③拧掉刹把上面的堵头螺丝(废弃)
④将油管插入刹把用紧迫螺丝压紧铜套完成安装

您购买的刹车不含工具!
如果您有需要请联系客服购买
或者店内自助购买
本店有销售!

①Measure the length of the tubing and cut it
②Press the oil needle with a tool
③ Unscrew the plug screw on the brake lever (discarded)
④Insert the oil pipe into the brake lever and press the copper sleeve with the pressing screw to complete the installation

! ! ! PLEASE NOTE: Your brake purchase does not include tools!
If you need, please contact customer service to buy
Or buy in-store
This shop has sales!

下面的工具和矿物油请根据自己的需求选择性购买,夹器不包含下面工具!

Please purchase the following tools and mineral oil according to your own needs, the clamp does not include the following tools!

上图是油管切断和油针压入工具,在您裁剪油管装入油针的时候使用.

The picture above is the tubing cutting and needle pressing tool, which is used when you cut the tubing and insert the oil needle.

上图为简易款注油工具,排空油管里面的空气或者补油时使用,选择性购买!

The picture above is a simple oil filling tool, used when emptying the air in the oil pipe or replenishing oil, choose to buy!

上图为NFOX工厂原装矿物油,为了以后刹车的维护,建议备用!

The picture above shows the original mineral oil of the NFOX factory. For the maintenance of the brakes in the future, it is recommended to reserve it!