GoBozor ga xush kelibsiz
CHANHYD Hand Operated Hydraulic Cimping Tool Hydraulic Cabl
Price section
dan boshlab
512 525 so'm
Технические характеристики
Crimping Tool
Cable Lug Crimping Tool
Crimping tool with cutter
12awg~00awg Crimping Tool
Crimper with cutter
Kafolatlangan yetkazib berish muddati
Agar biz 45 kun kechiksak, buyurtmani bepul olasiz. Batafsil
Har doim siz bilan aloqada
Biz har kuni savollarga har qanday savollarga javob beramiz.
To'lovni qulay usulda xavfsiz qiling
Biz to'lovlarni turli xil usullarda qabul qilamiz.
Bo'lib to'lash mavjud
Mahsulot haqida
Xususiyatlar
- Тип продукта
Матовый двигатель
- Тип двигателя
Миниатюрный мотор
- Бренд
Aikool
- Текущий тип
Связь
- Диапазон номинального напряжения 3C
Ниже 36 В
Tavsif
部分产品标价非卖价，请先咨询客服询价！！感谢您的理解！
-
Who are we?
Launched in China in 2010, CHANHYD has grown from a fledging startup to a global company that serves customers from all over the world. We have always been and will try our best to improve everyone's work efficiency.
-
Hydraulic Copper Pipe Crimper
Employs advanced forging craft to ensure accurate, scratch-free presses on pipe fittings.
AWG12-2/0 Hydraulic Cable Crimping Pliers
The crimper tool is great for battery and welding cables, power wires and electrical cables, even can be rotated 180° freely for narrow space working.
Using super hydraulic system to easily compress wires. One hand can operate both handles. Compared to products without return springs, it is easier to operate the handle with one hand, and one person can complete the crimping job independently.
This hydraulic cable lug crimper comes with 9 pairs of dies. The crimping range is AWG12-2/0, including 12, 10, 8, 6, 4, 2, 1/0, 2/0 AWG, (1/8" for stainless steel wire rope) to meet your different crimping needs.
Quick and Easy to Use Crimper Step by Step
1. Loosen the upper screw
Loosen the screw to easily replace the upper die.
2. Loosen the lower screw
Jack up the lower die base to remove the lower screw and replace the die.
3. Insert dies
Select the pressing die to match the crimping terminal and tight the dies with the crimper.
4. Turn valve to work
Turn the hydraulic valve to the "CLOSE" position.
5. Put in the terminal
Put the connecting terminal into the tool head.
6. Press the handle
Press the handle up and down. Continue pumping until handle comes to a stop.
7. Release the valve
Turn the hydraulic valve to the "OPEN" position and the piston is automatically reset.
8. Complete crimping
The crimping effect is good and tight.
Barcha xususiyatlar
Xususiyatlari
- Тип продукта
Матовый двигатель
- Тип двигателя
Миниатюрный мотор
- Бренд
Aikool
- Текущий тип
Связь
Tavsif
部分产品标价非卖价，请先咨询客服询价！！感谢您的理解！
-
Who are we?
Launched in China in 2010, CHANHYD has grown from a fledging startup to a global company that serves customers from all over the world. We have always been and will try our best to improve everyone's work efficiency.
-
Hydraulic Copper Pipe Crimper
Employs advanced forging craft to ensure accurate, scratch-free presses on pipe fittings.
AWG12-2/0 Hydraulic Cable Crimping Pliers
The crimper tool is great for battery and welding cables, power wires and electrical cables, even can be rotated 180° freely for narrow space working.
Using super hydraulic system to easily compress wires. One hand can operate both handles. Compared to products without return springs, it is easier to operate the handle with one hand, and one person can complete the crimping job independently.
This hydraulic cable lug crimper comes with 9 pairs of dies. The crimping range is AWG12-2/0, including 12, 10, 8, 6, 4, 2, 1/0, 2/0 AWG, (1/8" for stainless steel wire rope) to meet your different crimping needs.
Quick and Easy to Use Crimper Step by Step
1. Loosen the upper screw
Loosen the screw to easily replace the upper die.
2. Loosen the lower screw
Jack up the lower die base to remove the lower screw and replace the die.
3. Insert dies
Select the pressing die to match the crimping terminal and tight the dies with the crimper.
4. Turn valve to work
Turn the hydraulic valve to the "CLOSE" position.
5. Put in the terminal
Put the connecting terminal into the tool head.
6. Press the handle
Press the handle up and down. Continue pumping until handle comes to a stop.
7. Release the valve
Turn the hydraulic valve to the "OPEN" position and the piston is automatically reset.
8. Complete crimping
The crimping effect is good and tight.