GoBozor ga xush kelibsiz
dan boshlab
65 829 so'm
цвет
Kafolatlangan yetkazib berish muddati
Agar biz 45 kun kechiksak, buyurtmani bepul olasiz. Batafsil
Har doim siz bilan aloqada
Biz har kuni savollarga har qanday savollarga javob beramiz.
To'lovni qulay usulda xavfsiz qiling
Biz to'lovlarni turli xil usullarda qabul qilamiz.
Bo'lib to'lash mavjud
Mahsulot haqida
Xususiyatlar
Поддержка управления питанием
Гигабитная сеть
ali-731774259603
Адаптер/кабель-адаптер
другой
1m
см. описание
Линия мониторинга безопасности
Не поддерживает удаленное пробуждение
2023
Храните три гарантии
Спотовые товары
Кабель питания USB-хоста
Tavsif
开票需要加税点、详情联系客服!
These 1x2 Ethernet Splitter allows one router/ethernet switch to two Ethernet network out simultaneousely.The RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method.
Remarks:
2 options:
1)There are 2 options.One Supports up to 1000Mbps(marked as option of 1G).
And the inexpensive option is 100Mbps(marked as option of 100Mbps).
Data Speed
2)These data speed is the maximum of the chipset and the actual speed is subject to devices connected.And far from that of the maximum capability of the Chip.
Compatibility
These network splitter adapter wont work with IPTV,IP based on TV box and STB.Your network service provider has specific requirements on that.
100M network splitter
1000M Gigabit Splitter
Description:
Navceker 1x2 Ethernet Gigabit Splitter Allows one router/ethernet switch to two 1000Mbps Ethernet network signal simultaneousin different rooms, without having to pull the cable from other room to the room to connect to this computer.
You run one Ethernet cord from the wall to the splitter cable, one from the splitter to two computer(or laptop/Router/TV box/Internet TV etc).
There are 2 models optional, different model has different interface and appearance, please choose suitable model before purchase:
Features:
Please NOTE: Equipped with a USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection.
Ethernet Splitter 1 to 2: Navceker RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously.
Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 1000Mbps.And the signal transmission of two cable groups will not interfere with each other.
Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use.
Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible with Cat8 Cat7 Cat6 Network Ethernet Cable and can be compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer, etc.
Navceker Ethernet Splitter Adapter Advantage Design:
1. Can connect two computers at the same time Internet access the Internet simultaneously. (NOTE: USB powered, cannot be used without connection).
2. Solve the Network wifi signal weak and connection problems caused by insufficient wiring: such as the basement, the attic, the remote house, and 2 or more devices online.
3. RJ45 ethernet splitter adapter 8P8C is compatible with Cat8, Cat7, Cat6 Network Ethernet Cables.Two Devices Access the Internet Simultaneously
Solve the problem that home has only one embedded network port,and realize the simultaneous Internet access of two devices
RJ45 network Splitter adapter 2 devices simultaneous networking
1 to 2 RJ45 Splitter Adapter
Connect two devices to the internet at the same time
1Gbps Expanded Network Ports
Solve the problem that home has only one embedded network portMaximum Transmission UP to 100m
RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 1000Mbps. And the signal transmission of two cable groups will not interfere with each other.
Barcha xususiyatlar
Поддержка управления питанием
Гигабитная сеть
ali-731774259603
Адаптер/кабель-адаптер
Tavsif
开票需要加税点、详情联系客服!
These 1x2 Ethernet Splitter allows one router/ethernet switch to two Ethernet network out simultaneousely.The RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method.
Remarks:
2 options:
1)There are 2 options.One Supports up to 1000Mbps(marked as option of 1G).
And the inexpensive option is 100Mbps(marked as option of 100Mbps).
Data Speed
2)These data speed is the maximum of the chipset and the actual speed is subject to devices connected.And far from that of the maximum capability of the Chip.
Compatibility
These network splitter adapter wont work with IPTV,IP based on TV box and STB.Your network service provider has specific requirements on that.
100M network splitter
1000M Gigabit Splitter
Description:
Navceker 1x2 Ethernet Gigabit Splitter Allows one router/ethernet switch to two 1000Mbps Ethernet network signal simultaneousin different rooms, without having to pull the cable from other room to the room to connect to this computer.
You run one Ethernet cord from the wall to the splitter cable, one from the splitter to two computer(or laptop/Router/TV box/Internet TV etc).
There are 2 models optional, different model has different interface and appearance, please choose suitable model before purchase:
Features:
Please NOTE: Equipped with a USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection.
Ethernet Splitter 1 to 2: Navceker RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously.
Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 1000Mbps.And the signal transmission of two cable groups will not interfere with each other.
Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use.
Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible with Cat8 Cat7 Cat6 Network Ethernet Cable and can be compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer, etc.
Navceker Ethernet Splitter Adapter Advantage Design:
1. Can connect two computers at the same time Internet access the Internet simultaneously. (NOTE: USB powered, cannot be used without connection).
2. Solve the Network wifi signal weak and connection problems caused by insufficient wiring: such as the basement, the attic, the remote house, and 2 or more devices online.
3. RJ45 ethernet splitter adapter 8P8C is compatible with Cat8, Cat7, Cat6 Network Ethernet Cables.Two Devices Access the Internet Simultaneously
Solve the problem that home has only one embedded network port,and realize the simultaneous Internet access of two devices
RJ45 network Splitter adapter 2 devices simultaneous networking
1 to 2 RJ45 Splitter Adapter
Connect two devices to the internet at the same time
1Gbps Expanded Network Ports
Solve the problem that home has only one embedded network portMaximum Transmission UP to 100m
RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 1000Mbps. And the signal transmission of two cable groups will not interfere with each other.