Поставка развлекательные заведения мультфильм животных качели колыбельные детские игрушки

产品说明：本产品系列主要用于公园、游乐场所、社区、幼儿园、超市、别墅花园等，Product Instruction: The products are used in park, amusement ground, district, Kindergarten, Supermarket, Garden.产品结构及材质说明：1）立柱材质：采用直径114mm国标钢管、镀锌管、铝合金管，管壁厚度分别为2.0、2.5、3.0mm，表面先进行防锈处理后，再用进口室外聚脂系（POLYESTEY\\TCICSYSTEM）喷塑处理。1)-Material of Post: standard steel pipe, galvanized pipe, Aluminum alloy pipe, diameter is 114cm,thickness is 2.0、2.5、3.0mm,Gush mould by POLYESTEY/TCICSYSTEM after moving rust of post surface. 2）平台材质：采用冷轧孔板不积水，规格：1165×1165mm，厚度2.2mm，承受压力200公斤不变形；酸洗磷化后全部采用保护焊，机械抛光，室外聚脂系（POLYESTEY\\TCICSYSTEM）喷塑，高温加热后，耐磨，不褪色，不掉色，色彩鲜艳。2) Material of Deck: Adopt Cold Rolling board with holes. Specification:1165*1165mm, thickness is 2.2mm,can load 200 kgs. power without damage and shape changing. Adopt protection solders after clean by acid and bonderizing, then polishing by machine, mould by POLYESTEY/TCICSYSTEM, and heated in high temperature, durable, no fade 3）塑料件材质：全部采用韩国SK公司进口塑料（LLDPE）制作，色彩鲜艳有个性，耐晒不褪色，无毒、防紫外线。3)-Material of plastic parts: LLDPE Imported from Korea, colorful, personally, anti-sun, no fade, no hurt to body. 4扣件、脚盘材质：采用高密度铝材一次性铸造成型，表面进行机械抛光，室外聚脂系（POLYESTEY\\TCICSYSTEM）喷塑。4)--Material of Fastener、Pads: Adopt aluminum to cast shape at one time, surface is polished by machine, gush mould by POLYESTEY/TCICSYSTEM.

产品说明：本产品系列主要用于公园、游乐场所、社区、幼儿园、超市、别墅花园等，Product Instruction: The products are used in park, amusement ground, district, Kindergarten, Supermarket, Garden.产品结构及材质说明：1）立柱材质：采用直径114mm国标钢管、镀锌管、铝合金管，管壁厚度分别为2.0、2.5、3.0mm，表面先进行防锈处理后，再用进口室外聚脂系（POLYESTEY\\TCICSYSTEM）喷塑处理。1)-Material of Post: standard steel pipe, galvanized pipe, Aluminum alloy pipe, diameter is 114cm,thickness is 2.0、2.5、3.0mm,Gush mould by POLYESTEY/TCICSYSTEM after moving rust of post surface. 2）平台材质：采用冷轧孔板不积水，规格：1165×1165mm，厚度2.2mm，承受压力200公斤不变形；酸洗磷化后全部采用保护焊，机械抛光，室外聚脂系（POLYESTEY\\TCICSYSTEM）喷塑，高温加热后，耐磨，不褪色，不掉色，色彩鲜艳。2) Material of Deck: Adopt Cold Rolling board with holes. Specification:1165*1165mm, thickness is 2.2mm,can load 200 kgs. power without damage and shape changing. Adopt protection solders after clean by acid and bonderizing, then polishing by machine, mould by POLYESTEY/TCICSYSTEM, and heated in high temperature, durable, no fade 3）塑料件材质：全部采用韩国SK公司进口塑料（LLDPE）制作，色彩鲜艳有个性，耐晒不褪色，无毒、防紫外线。3)-Material of plastic parts: LLDPE Imported from Korea, colorful, personally, anti-sun, no fade, no hurt to body. 4扣件、脚盘材质：采用高密度铝材一次性铸造成型，表面进行机械抛光，室外聚脂系（POLYESTEY\\TCICSYSTEM）喷塑。4)--Material of Fastener、Pads: Adopt aluminum to cast shape at one time, surface is polished by machine, gush mould by POLYESTEY/TCICSYSTEM.