0.61 Спецификация 100 г сублимационного трансферного листа бумаги для одежды сублимационного трансферного листа высокого качества стопы

产品简述：

类别：100克快干型热升华转印纸

品牌：JD（一代）

规格：610mm*100M

常规生产宽幅(mm单位)：

610，914，1118，1300，1370，1500，1520，1600，1620，1800，1830

最大生产宽幅：3.2米

1.使用范围：化纤,涤纶，含棉40%以下的混纺面料以及含涂层的玻璃，陶瓷，金属，木板等

2.存放条件：防水，防火，避强光（不使用时注意密封）
3.适合我们产品的打印机
普通喷墨打印机：Epson C65、830u、R210、R310、R800、1520K、EX3、1290、2100、Lenovo：CJ100等
宽幅喷墨打印机：Epson 7880、9880、7450、9450、9910、11880..；Roland（罗兰FJ640,740..）Mutoh（武藤RJ900C..）、Mimaki等
4.要使用专用的热升华转印墨水
一定要使用热升华转印墨水，这种用分散染料制作的墨水，在转印温度下会产生升华并与承印物染色。品质好的热升华墨水不宜堵塞喷头，色彩逼真，稳定性好。
5.调节合适的色彩浓度
在电脑中调整色彩的浓度，避免出现墨水过多不易干的情况，调整之后需要检查一下热转印的效果。
6.调节合适的热压温度和时间
热转印的温度范围约180-230℃，时间约10-30秒，在正式批量转印前应该先做小试决定最佳工艺参数。
7.热转印时热压面必需紧贴
在热转印时热压面、转印纸、承印物表面必需紧贴，不能有空隙，否则会出现转印图文模糊现象。
8.热升华转印的优点
热升华转印图文色彩鲜艳、丰富，其效果可与印刷相媲美，热升华转印是在高温下使热转印墨水受热升华渗入物体，凝华后即形成色彩亮丽的图像。所以，热转印产品经久耐用，图像不会脱落，龟裂和褪色。

Product description:

Category: Quick-drying 100g Sublimation Transfer Paper

Brand: JD (1^stGeneration)

Specifications: 1800mm*100M

1. Use range: chemical fiber, polyester, blended fabric with less than 40% cotton, and coated glass, ceramics, metal, wood, etc.

2. Storage conditions: waterproof, fireproof, avoid light (note the seal when not in use)

3. Printers suitable for our products

Ordinary inkjet printers: Epson C65, 830u, R210, R310, R800, 1520K, EX3, 1290, 2100, Lenovo: CJ100, etc.

Wide-format inkjet printers: Epson 7880, 9880, 7450, 9450, 9910, 11880..; Roland (Roland FJ640, 740..) Mutoh (Muto RJ900C..), Mimaki, etc.

4. To use special dye sublimation transfer ink

Must use dye-sublimation transfer ink. The sublimation ink, produced using disperse dyes, will sublimate at the transfer temperature and will stain the substrate. The sublimation ink with good quality should not clog the nozzle, the color is fidelity and the stability is good.

5. Adjust the appropriate color concentration

Adjust the color concentration in the computer to avoid the situation where the ink is difficult to dry and it is necessary to check the effect of the thermal transfer effect after adjustment.

6. Adjust the appropriate hot press temperature and time

Sublimation transfer temperature range of about 180-230°C, time is about 10-30 seconds, before the official batch transfer should be done before the small test to determine the best process parameters.

7. Heat press surface must be tightly attached during sublimation transfer

In the sublimation transfer, the surface of the hot pressing surface, the transfer paper, and the surface of the substrate must be tightly adhered to each other, and voids may not be present. Otherwise, the image blurring phenomenon may occur.

8. Advantages of Sublimation Transfer

The sublimation transfer graphic is vivid in color and rich in color. Its effect can be comparable to that of printing. Sublimation transfer is to sublimate the sublimation ink under the high temperature to infiltrate into the object, and the bright color image is formed after the sublimation. Therefore, the sublimation transfer products are durable and the images will not fall off, crack and fade.

The Conventional production width (mm units):

914,1118,1300,1370,1500,1520,1600,1620,1800

The longest production length: 12000 meters