Модуль кислотно-основного датчика 1 модуль датчика V1.1 + 1 шт. Кислотно-щелочной разведки AVR
Модуль кислотно-основного датчика 1 модуль датчика V1.1 + 1 шт. Кислотно-щелочной разведки AVR
Модуль кислотно-основного датчика 1 модуль датчика V1.1 + 1 шт. Кислотно-щелочной разведки AVR
Модуль кислотно-основного датчика 1 модуль датчика V1.1 + 1 шт. Кислотно-щелочной разведки AVR

Модуль кислотно-основного датчика 1 модуль датчика V1.1 + 1 шт. Кислотно-щелочной разведки AVR

5.0
2 купили
Минимальное количество: 1 шт

Цена от

507 823 so'm

Гарантия доставки и возврата

Опоздаем на 45 дней, получите заказ бесплатно. Подробнее

Служба поддержки

Ответим на любые вопросы каждый день.

Безопасная оплата

Примем оплату картой или в рассрочку

Доступна рассрочка

Uzum
выберите товар
inTend
выберите товар
*Финальная стоимость рассрочки рассчитывется при оформлении.
Модуль кислотно-основного датчика 1 модуль датчика V1.1 + 1 шт. Кислотно-щелочной разведки AVR

О товаре

Характеристики

Происхождение

Китай

Напряжение питания

Смотрите страницу деталей

Инкапсуляция

Датчик

Пункт Нет.

Смотрите страницу деталей

Тип

Другие ИС

Марка

BYS

Модель

BYS459-1500

Импорт или нет

Нет

Упаковка

Картонная упаковка

Диапазон измерения

Смотрите страницу деталей

Индивидуальная обработка

Нет

Номер заказа

Смотрите страницу деталей

Иметь авторизованные частные бренды

Да

Описание

 
Description:
  • Features: 



    Water quality testing
    Aquaculture

    Specification:
    Module Power : 5.00V
    Module Size : 43 x 32mm
    Measuring Range :0 - 14PH
    Measuring Temperature: 0 - 60 °C
    Accuracy : ± 0.1pH (25 °C)
    Response Time : ≤ 1min
    pH Sensor with BNC Connector
    pH2.0 Interface ( 3 foot patch )
    Gain Adjustment Potentiometer
    Power Indicator LED

    Arduino DEMO Code:

    /*
    # This sample codes is for testing the pH meter V1.0.
    # Editor : YouYou
    # Date : 2013.10.21
    # Ver : 0.1
    # Product: pH meter
    # SKU : SEN0161
    */

    #define SensorPin 0 //pH meter Analog output to Arduino Analog Input 0
    #define Offset 0.00 //deviation compensate
    unsigned long int avgValue; //Store the average value of the sensor feedback
    void setup()
    {
    pinMode(13,OUTPUT);
    Serial.begin(9600);
    Serial.println("Ready"); //Test the serial monitor
    }
    void loop()
    {
    int buf[10]; //buffer for read analog
    for(int i=0;i<10;i++) //Get 10 sample value from the sensor for smooth the value
    {
    buf[i]=analogRead(SensorPin);
    delay(10);
    }
    for(int i=0;i<9;i++) //sort the analog from small to large
    {
    for(int j=i+1;j<10;j++)
    {
    if(buf[i]>buf[j])
    {
    int temp=buf[i];
    buf[i]=buf[j];
    buf[j]=temp;
    }
    }
    }
    avgValue=0;
    for(int i=2;i<8;i++) //take the average value of 6 center sample
    avgValue+=buf[i];
    float phValue=(float)avgValue*5.0/1024/6; //convert the analog into millivolt
    phValue=3.5*phValue+Offset; //convert the millivolt into pH value
    Serial.print(" pH:");
    Serial.print(phValue,2);
    Serial.println(" ");
    digitalWrite(13, HIGH);
    delay(800);
    digitalWrite(13, LOW);
    }

     
  • Package Contents 

    Brand New

    1xAnalog PH Probe Sensor Shield and PH Probe Kit For Arduino Compatible
  • 352

    350

    351

Характеристики

Свойства

Происхождение

Китай

Напряжение питания

Смотрите страницу деталей

Инкапсуляция

Датчик

Пункт Нет.

Смотрите страницу деталей

Описание

 
Description:
  • Features: 



    Water quality testing
    Aquaculture

    Specification:
    Module Power : 5.00V
    Module Size : 43 x 32mm
    Measuring Range :0 - 14PH
    Measuring Temperature: 0 - 60 °C
    Accuracy : ± 0.1pH (25 °C)
    Response Time : ≤ 1min
    pH Sensor with BNC Connector
    pH2.0 Interface ( 3 foot patch )
    Gain Adjustment Potentiometer
    Power Indicator LED

    Arduino DEMO Code:

    /*
    # This sample codes is for testing the pH meter V1.0.
    # Editor : YouYou
    # Date : 2013.10.21
    # Ver : 0.1
    # Product: pH meter
    # SKU : SEN0161
    */

    #define SensorPin 0 //pH meter Analog output to Arduino Analog Input 0
    #define Offset 0.00 //deviation compensate
    unsigned long int avgValue; //Store the average value of the sensor feedback
    void setup()
    {
    pinMode(13,OUTPUT);
    Serial.begin(9600);
    Serial.println("Ready"); //Test the serial monitor
    }
    void loop()
    {
    int buf[10]; //buffer for read analog
    for(int i=0;i<10;i++) //Get 10 sample value from the sensor for smooth the value
    {
    buf[i]=analogRead(SensorPin);
    delay(10);
    }
    for(int i=0;i<9;i++) //sort the analog from small to large
    {
    for(int j=i+1;j<10;j++)
    {
    if(buf[i]>buf[j])
    {
    int temp=buf[i];
    buf[i]=buf[j];
    buf[j]=temp;
    }
    }
    }
    avgValue=0;
    for(int i=2;i<8;i++) //take the average value of 6 center sample
    avgValue+=buf[i];
    float phValue=(float)avgValue*5.0/1024/6; //convert the analog into millivolt
    phValue=3.5*phValue+Offset; //convert the millivolt into pH value
    Serial.print(" pH:");
    Serial.print(phValue,2);
    Serial.println(" ");
    digitalWrite(13, HIGH);
    delay(800);
    digitalWrite(13, LOW);
    }

     
  • Package Contents 

    Brand New

    1xAnalog PH Probe Sensor Shield and PH Probe Kit For Arduino Compatible
  • 352

    350

    351

От этого продавца

Посмотреть все