Новый солнечный грызунов отпугиватель птиц ультразвуковой отпугиватель солнечных животных отпугиватель ультразвуковой зверей

SJZ-618 Multi-function Solar Animal Drive Instruction

Function Description

- Multi-function animal drive, when the animal enters the area, the infrared sensor is triggered, the red LED lights up, the product senses the animal, and emits ultrasonic waves, voice, vibration, and a strong flash of two-color lights that make the animal feel uncomfortable and escape from the area.

-- Vibrating device, buzzer and motor are fixed in the grounding rod; through the buzzer, the motor works under the ground to generate oscillations to form low-frequency mechanical waves, the sound waves propagate through the solid matter (earth) (buzzer frequency: 400-1000Hz ; motor speed 5000r / min;) to drive the moles and snakes in the ground

-LED flash night device, night pest control, daytime solar battery charging protect your property and livestock from unnecessary nighttime pests such as coyotes, raccoons, skunks, foxes, wolves, deer, cougars and cats. It mainly uses red light with a penetrating power of 600-700 nm wavelength, and emits radiant energy to simulate the shape of the fire, which causes a shocking effect on the animal. When the animal enters the area, the LED flashes to make the animal scared and flee the area. The built-in light brightness detector automatically starts at night.

Operating Instructions

- "Sensitivity" button: Sensitivity and sensing distance are adjustable. Clockwise rotate the knob to increase the range of protection.

- "Frequency" button: This button is used to adjust the ultrasonic frequency. Clockwise rotate the knob and the ultrasonic frequency gradually increases.

-"SonicVolume" button: This button is used to adjust the voice volume of the ultrasonic wave. Clockwise turn the knob to increase the voice volume.

-"OperatingTime" toggle switch:

(1st gear) 24HR, infrared sensor detector is triggered, ultrasonic, voice, vibration, two-color lamp strong flash work (automatic identification of day and night work mode).

(2nd gear) Day, the daytime infrared sensor detector is triggered, this device will emit ultrasonic, voice, buzzer to drive animals away

(3rd gear) Night, the infrared sensor detector is triggered. This device sends the ultrasonic wave, two-color strong flash lamp and vibrating buzzer to drives animals away

-" PowerSupply" toggle switch:

(1st gear) power switch

(2nd gear) inductive sweep frequency, the infrared sensor detector is triggered, the device will stop working after 36 seconds and wait to be triggered again.

(3) Continuous frequency sweep, no need for induction, indirect cycling, (note: this gear requires an external 5V power supply to make it work; the battery is exhausted by the power supply device to make the device stop working)

Specifications

●Infrared sensing angle: 110 degrees

●Sensing distance: 8-9.5m, depending on the size and temperature of the animal. (The larger the animal is, the farther the distance is, the higher the temperature is, and the closer the distance is.)

●Power supply mode: 3*AA* 1.2V battery power supply in the device, solar energy is 3*AA *1.2V battery, (Ni-Cd or Ni-MH) charging, (solar panel open circuit voltage: 5.8V; solar panel working current:≧20-200mA) or can be charged with an external 5V 500mA adapter. In case of long-term rainy weather, the adapter can be used for charging. During charging, the red indicator light is on; when it is fully charged, green light indicator is on.

About the battery

1. If the battery has not been used for a long time (1 month), the battery may run out. It is recommended to have the battery fully charged for 3-5 times

3. After the battery has been used for a certain period of time, the life will change and it will be fully charged quickly. In this case, please replace the battery with 3 AA 1.2V rechargeable batteries (Ni-Cd or Ni-MH). The better the battery quality is, the better the power is and the better the results are.

3. Please return the rejected batteries to the local recycling center. Please consult the relevant local competent department for details.

Precautions

Sometimes humans have some ultrasound perception. Please keep the product away from the living area. Do not place the product in the activity areas of infants and children.

Please do not block the infrared sensor detector. When cleaning the product, clean it with a soft cloth and soap. Do not use chemicals or corrosive cleaning product to prevent damage.