Добро пожаловать в GoBozor
Адаптер питания 48V0.31A/1A/2A, совместимый с ALCATEL-LUCENT IP PHONE4008/4018
0.0
0 купили
Минимальное количество: 100 шт
Price section
Цена от
131 658 so'm
131 658 so'm
1000 availableГарантия доставки и возврата
Опоздаем на 45 дней, получите заказ бесплатно. Подробнее
Служба поддержки
Ответим на любые вопросы каждый день.
Безопасная оплата
Примем оплату картой или в рассрочку
Доступна рассрочка
выберите товар
выберите товар
*Финальная стоимость рассрочки рассчитывется при оформлении.
Адаптер питания 48V0.31A/1A/2A, совместимый с ALCATEL-LUCENT IP PHONE4008/4018
О товаре
Характеристики
- Размер продукта
1
- Пункт Нет.
1
- Тип
1
- Модель
BX-4801000
- Вес продукта
1
- Время выхода на рынок
1
- Послепродажное обслуживание
1
- Категория ИСТОЧКА
В наличии
- Самое быстрое время доставки
4-7 дней
- Поддержка цельной доставки
Поддержка
- Счет
1
- Список упаковки
1
Описание
1、DESCRIPTION:
The purpose of the document is to specify the functional requirements
of a 15W switching power supply.
2、INPUT CHARACTERISTICS:
2.1 Input Voltage:
Rated Voltage:100~240Vac
Variation Range:90-264Vac
2.2 INPUT FREQUENCY:
Rated Frequency: 50/60Hz.
Variation Frequency:47-63Hz
2.3 INPUT CURRENT:
0.8Amps max At any input voltage and rated, DC output rated load.
2.4 INRUSH CURRENT:
30 Amps Max. Cold start at 240Vac input, with rated load and 25℃ambient.
2.5 AC LEAKAGE CURRENT
5mA Max.At240Vac input.model:BX-4800310
3、 OUTPUT CHARACTERISTICS:
3.1 Power output
Voltage
Min. Load
Rated. Load
Peak
Output power
48Vdc
0.00A
0.31A
18W
15W
3.2 Combined Load/Line Regulation
Voltage
Min. Load
Rated. Load
Line Regulation
Voitage range
48Vdc
0.00A
0.31A
±5%
11.6-12.4V
3.3 Ripple and Noise:
Under nominal voltage and nominal load,the ripple and noise are as follows when measure with
Max.Bandwidth of 20MHz and Parallel 47uF/0.1uF,crossed connected at testing point.
Voltage Ripple and Noise(Max.)
+48Vdc 150mV p-p
3.4 Turn on delay time:
3Second Max.at 115Vac input and output Max.load.
3.5 Rise time:
40 mS Max.at 115Vac input and output Max load.
3.6 Hold up time:
5 mS Min.at 115Vac input and output Max.Load.
3.7 Average Effiviency
Average Effiviency 88%Min, At 115/230Vac input and output 100%Load 75%Load 50%Load
25%Load
4、 PROTECTION FUNCTION:
4.1 Short circuit test:
The power supply will be auto recovered when short circuit faults remove.
4.2 Over current Protection:
The power supply will be auto recovered when over current faults remove.
4.3 Over Voltage Protection:
The power supply will auto recovered when faults remove 120%~170%.
5、 ENVIRONMENTAL REQUIREMET:
5.1 Operating Temperature:
0℃ to 40℃,Full load, Normal operation.
5.2 Storage Temperature:-20℃ to 80℃
With package
5.3 Relative Humidity:
5%(0℃)~90%(40℃)RH,72Hrs,Full load, Normal operating.
5.4 Vibration:
5.4.1 Operating: IEC 721-3-3 3M3
5~9Hz,A=1.5mm
(9~200Hz,Acceleration 5m/S2)
5.4.2.Transportation:
IEC 721-3-2 2M2
5-9Hz,A=3.5mm
9~200Hz,Acceleration=5m/S2
200~500Hz,Acceleration=15m/S2
5.4.3. Axes,10 cycles per axis.
No permanent damage may occur during testing.
The SAMPLE has to restore to its original situation after power off/on..
5.5 Dropping Packed:
1M for wallmount type and 760mm for desktop type as above described.
The horizontal surface consists of hardwood at least 13mm thick, mounted on two layers of plywood
each 19mm to 20mm thick,all supported on a concrete or equivalent non-resilient floor.
6、 SAFETY REQUIREMENT:
6.1 Safety: accord with TUV/CE-(EN60950-1) CCC（
GB4943.1-2011）
6.2 DIELECTRIC STRENGTH Hi-Pot:
Primary to secondary:3000Vac10mA/3S for type test.
6.3 Iusulation resistance:
Primary to secondary:10MΩ min at 500V DC
6.4 EMI STANDARD
Meets the Limits of
<1>.Fcc part15 class B rules
<2>.EN55032 class B rules
<3>.GB9254-1998,GB17625.1-2003
Характеристики
Свойства
- Размер продукта
1
- Пункт Нет.
1
- Тип
1
- Модель
BX-4801000
Описание
1、DESCRIPTION:
The purpose of the document is to specify the functional requirements
of a 15W switching power supply.
2、INPUT CHARACTERISTICS:
2.1 Input Voltage:
Rated Voltage:100~240Vac
Variation Range:90-264Vac
2.2 INPUT FREQUENCY:
Rated Frequency: 50/60Hz.
Variation Frequency:47-63Hz
2.3 INPUT CURRENT:
0.8Amps max At any input voltage and rated, DC output rated load.
2.4 INRUSH CURRENT:
30 Amps Max. Cold start at 240Vac input, with rated load and 25℃ambient.
2.5 AC LEAKAGE CURRENT
5mA Max.At240Vac input.model:BX-4800310
3、 OUTPUT CHARACTERISTICS:
3.1 Power output
Voltage
Min. Load
Rated. Load
Peak
Output power
48Vdc
0.00A
0.31A
18W
15W
3.2 Combined Load/Line Regulation
Voltage
Min. Load
Rated. Load
Line Regulation
Voitage range
48Vdc
0.00A
0.31A
±5%
11.6-12.4V
3.3 Ripple and Noise:
Under nominal voltage and nominal load,the ripple and noise are as follows when measure with
Max.Bandwidth of 20MHz and Parallel 47uF/0.1uF,crossed connected at testing point.
Voltage Ripple and Noise(Max.)
+48Vdc 150mV p-p
3.4 Turn on delay time:
3Second Max.at 115Vac input and output Max.load.
3.5 Rise time:
40 mS Max.at 115Vac input and output Max load.
3.6 Hold up time:
5 mS Min.at 115Vac input and output Max.Load.
3.7 Average Effiviency
Average Effiviency 88%Min, At 115/230Vac input and output 100%Load 75%Load 50%Load
25%Load
4、 PROTECTION FUNCTION:
4.1 Short circuit test:
The power supply will be auto recovered when short circuit faults remove.
4.2 Over current Protection:
The power supply will be auto recovered when over current faults remove.
4.3 Over Voltage Protection:
The power supply will auto recovered when faults remove 120%~170%.
5、 ENVIRONMENTAL REQUIREMET:
5.1 Operating Temperature:
0℃ to 40℃,Full load, Normal operation.
5.2 Storage Temperature:-20℃ to 80℃
With package
5.3 Relative Humidity:
5%(0℃)~90%(40℃)RH,72Hrs,Full load, Normal operating.
5.4 Vibration:
5.4.1 Operating: IEC 721-3-3 3M3
5~9Hz,A=1.5mm
(9~200Hz,Acceleration 5m/S2)
5.4.2.Transportation:
IEC 721-3-2 2M2
5-9Hz,A=3.5mm
9~200Hz,Acceleration=5m/S2
200~500Hz,Acceleration=15m/S2
5.4.3. Axes,10 cycles per axis.
No permanent damage may occur during testing.
The SAMPLE has to restore to its original situation after power off/on..
5.5 Dropping Packed:
1M for wallmount type and 760mm for desktop type as above described.
The horizontal surface consists of hardwood at least 13mm thick, mounted on two layers of plywood
each 19mm to 20mm thick,all supported on a concrete or equivalent non-resilient floor.
6、 SAFETY REQUIREMENT:
6.1 Safety: accord with TUV/CE-(EN60950-1) CCC（
GB4943.1-2011）
6.2 DIELECTRIC STRENGTH Hi-Pot:
Primary to secondary:3000Vac10mA/3S for type test.
6.3 Iusulation resistance:
Primary to secondary:10MΩ min at 500V DC
6.4 EMI STANDARD
Meets the Limits of
<1>.Fcc part15 class B rules
<2>.EN55032 class B rules
<3>.GB9254-1998,GB17625.1-2003