Красная оболочка AR8000 CM821 со спутниковым приемником DS-MX 8-полосная Совместимость с XG11

支持一件代发哦，联系客服。

CM821 有两种颜色外壳红色和灰色, 需要什么颜

色和客服联系  

小卫星也可以单独购买

支持J-R和Spek-trum DSM-X 和 DS-M2 共2种制式遥控器 DX6I， DX18， DX8，DX9，DEVO10 等所有含 DSM-X，  DS-M2  模式的遥控器，或拓展的发射模块

商品规格:

通道：8通

制式：DSM-X 和 DS-M2 两种制式

频段：2.4GHz

尺寸：34.3mmx32.3mmx11.4mm

重量：10g

输入电压范围：3.5-9.6V

天线长度：主接收的RX：30mm遥控器的RX：30mm

REDCON CM821(AR8000) High-speed 2.4Ghz Reciever

Specifications

Channels: 8CH

Band:2.4GHZ

Size:34.3mmx32.3mmx11.4mm

Weight:13g

Key Features:

8 Channel full range receiver

Fail-safe system

High-speed--11 millisecond frame rate provides superior speed from stick input to servo output

2048 Resolution

Long range flight

Voltage 3.3V-10V

Dual battery redundancy-each battery is isolated and if one shorts/fails another one takes over

4 PCS remote receivers to assure a comprehensive safety network on multiple levels.

Compatible with

JR12X, 11X, X9503, X9303

DX10t, DX8, DX7s, DX7se, DX6i, DX5e and Module Systems DX6

CM821 for use in aircraft including:

All sizes of Glow, gas and electric powered airplanes, gliders, helicopters ,drones

Binding process:

1. Put the binding harness into connector location marked BIND.  Next apply power to the receiver.  Both receiver and Satellite LED's should illuminate.2.To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested).Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter. 

3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programmed correctly.

4.Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on.  All channels should function properly now. You may test fail-safe by holdingsticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.

General Notes:

Only onetimebind procedure is required on a new receiver.the receiver will remember the radio which. Always remember to remove the binding harness after successful bind is completed.

LED Indication

1.Solid illuminated Red LED is indicates good signal.  If flashing, 1 flash indicates 1 signal loss, 2 = 2 signal losses and etc....

2.The Orange LED on main receiver should flash one time when power is first applied.  It will flash several times when binding harness is connected.  It should stay illuminated if main receiver losses signal but the Satellite is still working.

3. The Orange LED on the Satellite will flash one time when power is first applied.  It will flash several times during binding process.  It will stay illuminated when satellite is function normally.

Package including：

MainReceiver*1 pcs，satellite*1pc，bind plug *1pc

 

包装包含: CM821 X1 套  红色外壳

 或者

AR8000 *1 套   灰色外壳
对码器X1