Добро пожаловать в GoBozor
Порошок стабильной подачи encore всасывающий насос, 1095922 Norsin порошковый насос с высокой эффективностью
0.0
0 купили
Минимальное количество: 10 шт
Price section
Цена от
2 821 236 so'm
Технические характеристики
Стандартные характеристики
2 821 236 so'm
200 availableГарантия доставки и возврата
Опоздаем на 45 дней, получите заказ бесплатно. Подробнее
Служба поддержки
Ответим на любые вопросы каждый день.
Безопасная оплата
Примем оплату картой или в рассрочку
Доступна рассрочка
выберите товар
выберите товар
*Финальная стоимость рассрочки рассчитывется при оформлении.
Порошок стабильной подачи encore всасывающий насос, 1095922 Norsin порошковый насос с высокой эффективностью
О товаре
Характеристики
- Происхождение
Китай
- Номер товара
TF627278991889
- Бренд
другое
- модель
encore
- Цель
Устройство для всасывания порошка Nixin
- Алисы
Новый порошковый насос
- Импортировано ли оно?
Нет
- Обработка и настройка
Да
- Номер заказа
TF345466724689
Описание
The Encore Generation II powder feed pump is a venturi-type pump that
supplies organic and metallic powder coatings to powder spray guns. It is
available in two versions, Corona and Tribo. The Corona version has two
quick-disconnect fittings for flow-rate and atomizing air, while the Tribo
version has only one fitting for flow-rate air.
Flow-rate air lifts fluidized powder from a vibratory box feed or a feed
hopper and forces the powder through the powder hose to the spray guns.
Atomizing air dilutes and atomizes the powder stream, and increases its
velocity, as it exits the pump.
Encore Systems with NHR-25 or NHR-50 Hoppers
Encore systems are shipped with an Encore pump adapter that replaces the
existing pump adapters designed for Nordson 100 Plus or Modular powder
feed pumps.
1. Pull the pump adapter and pickup tube out of the pump mount on the
hopper lid.
2. Unscrew the pickup tube from the adapter.
3. Screw the Encore pump adapter on the pickup tube.
4. Install the pump adapter and pickup tube into the pump mount.
5. Install the Encore pump into the pump adapter with a slight twisting
motion.
Existing Systems with NHR Hoppers
Optional pickup tubes with Encore pump mounts are available to replace
the pickup tubes on HR and NHR hoppers. Refer to Optional Pickup Tubes
on page 8 for part numbers.
Alternatively, optional couplings and adapters are available for installing the
Encore pump on HR or NHR hopper pickup tubes that are equipped with
pump adapters with external O-rings. Refer to Optional Pump Coupling and
Adapter on page 8 for part numbers.
Coupling Installation
The optional coupling allows you to use the existing pickup tube.
1. Install the pump coupling on the pump mount with a slight twisting
motion
2. Install the Encore pump into the coupling with a slight twisting motion.
Adapter Installation
The optional pump adapter replaces existing pump adapters with external
O-rings and threaded 0.360 in. ID pickup tubes.
1. Pull the pump adapter and pickup tube out of the pump mount and
unscrew the adapter from the pickup tube.
2. Screw the Encore pump adapter onto the pickup tube.
3. Re-install the pickup tube and pump adapter into the pump mount on the
hopper lid, then install the Encore pump into the adapter with a slight
twisting motion.
Характеристики
Свойства
- Происхождение
Китай
- Номер товара
TF627278991889
- Бренд
другое
- модель
encore
Описание
The Encore Generation II powder feed pump is a venturi-type pump that
supplies organic and metallic powder coatings to powder spray guns. It is
available in two versions, Corona and Tribo. The Corona version has two
quick-disconnect fittings for flow-rate and atomizing air, while the Tribo
version has only one fitting for flow-rate air.
Flow-rate air lifts fluidized powder from a vibratory box feed or a feed
hopper and forces the powder through the powder hose to the spray guns.
Atomizing air dilutes and atomizes the powder stream, and increases its
velocity, as it exits the pump.
Encore Systems with NHR-25 or NHR-50 Hoppers
Encore systems are shipped with an Encore pump adapter that replaces the
existing pump adapters designed for Nordson 100 Plus or Modular powder
feed pumps.
1. Pull the pump adapter and pickup tube out of the pump mount on the
hopper lid.
2. Unscrew the pickup tube from the adapter.
3. Screw the Encore pump adapter on the pickup tube.
4. Install the pump adapter and pickup tube into the pump mount.
5. Install the Encore pump into the pump adapter with a slight twisting
motion.
Existing Systems with NHR Hoppers
Optional pickup tubes with Encore pump mounts are available to replace
the pickup tubes on HR and NHR hoppers. Refer to Optional Pickup Tubes
on page 8 for part numbers.
Alternatively, optional couplings and adapters are available for installing the
Encore pump on HR or NHR hopper pickup tubes that are equipped with
pump adapters with external O-rings. Refer to Optional Pump Coupling and
Adapter on page 8 for part numbers.
Coupling Installation
The optional coupling allows you to use the existing pickup tube.
1. Install the pump coupling on the pump mount with a slight twisting
motion
2. Install the Encore pump into the coupling with a slight twisting motion.
Adapter Installation
The optional pump adapter replaces existing pump adapters with external
O-rings and threaded 0.360 in. ID pickup tubes.
1. Pull the pump adapter and pickup tube out of the pump mount and
unscrew the adapter from the pickup tube.
2. Screw the Encore pump adapter onto the pickup tube.
3. Re-install the pickup tube and pump adapter into the pump mount on the
hopper lid, then install the Encore pump into the adapter with a slight
twisting motion.