Граффити APP время голосовой трубчатый контроллер двигателя переключатель умный дом WIFI шторы переключатель включения и выключатель

Max.Current:16A
wi-Fi Standard: Wi-Fi 2.4ghz b/g/n（Not supporting 5G）
working temperature: -50°C~70°C
Input voltage: 100V-240VAC
RF remote control: 433mhz remote control
This remote control can only work with our receiver

Support tuya WIFI Control

You can control the connectted home appliance in tuya APP anywhere and anytime.Such as light, Electric curtains /blinds /automatic doors /rolling shutter doors /electric gates /electric skylights /Door system etc.

Support 433mhz remote control

You can control your household appliances through our remote control, Such as light, electric kettle, electric rice cooker, electric curtain, Gate, Door system etc

Support Mobile Phone Control

When you go outside or at home,you could control the device in your smart phone by 2G/3G/4G Mobile Network or WIFI.
(Note:The router need to online.The WIFI module need to keep a close distance with the router and the wifi module need to online in tuya APP)

Support Voice Control

Compatible with Alexa and Google Assistant, you can use the voice control to turn on/off the connectted home appliances .

Support Share Control

One device can control by Multiple phones,you can share the wifi module with your family.

Support Group Control

one phone can control Multiple smart device.You can add the wifi module and other smart device in a group,and then you can turn on/off all smart device at the same time.

Support Timing Function

Set a schedule in the app to turn on and off your lights according to your own living habits

Connect to RF remote control programming

Step 1: Press the learning button(on the Receiver) 1 times . Wait for 3 seconds;
Step 2: Press the button on the remote control. Wait for 3 seconds. Succeed.

How to clear the signal
Press the learning button(on the Receiver) 8 times. Wait for 3 seconds;

Connect to tuya APP

Please download the tuya app from the app store

A: Add device by App
1. The device would be in the 'Network state' when the indicator flashes slowly after power on.
2. Click'add device', choose 'WIFI Curtain module'
3. Phone will be connected into 2.4G signal,and input your wifi passwords.
4. If fail to connect to the network after power on, kindly
long press the learning button on the device until the indica tor Rlashes 2 times then release it ; Led flash slowly,means it is connected into the 'Network state'
5. Click'Next'to wait (device would be added successfully)

B: APP Page Controlling
1. Click the 'on ' icon to operate the motor
2. Click button icon in the middle to pause the motor operating
3.Click the 'off ' icon to close the motor
4.Click the 'Setting ' icon to set the other functional of the motor