Оптовая продажа IR удлинитель от HDMI cable CEC канал передачи IR extender инфракрасный удлинитель

IR延长器

产品简介

产品特点及规格：

l可以通过红外IR接收到的红外遥控指令来进行信号源远程控制。

lIR延长器距离25m米，决定于HDMI线的长度

l控制：手动电子开关选择CEC/IR延长功能，（使用IR延长功能需把红外接口适配器开关拔到IR状态）

l工作电流：15mA

l重量：80G，外壳：塑胶盒

l安装方便操作简单

l无需外接电源

随机配送附件:

1、红外接口适配器    2 PCS

2、红外IR接收配件  1PCS

3、红外IR发射配件  1PCS

物理连接口示意图:

1.         用一根HDMI线分别将两个红外接口适配器IN连接到起

2.         把其中任何一端的红外接口适配器OUT接口连接到信号源，另一端的红外接口适配器OUT接口连接到显示设备

3、       红外IR接收配件与显示设备端的红外接口适配器IR-RX接口连接起来。

4、       红外IR发射配件与信号源端的红外接口适配器IR-RX接口连接起来。

注意：设备连接请使用标准的HDMI线！！！

INTRODUCTION

The IR extender can do IR signal extend by the CEC channel of the HDMI port. You can do control to the IR Signal source device by using the received IR (infrared) signal by the IR Receiver.

Features & Specification

lIt can do control to the IR Signal source device by using the received IR (infrared) signal by the IR Receiver.

lIR extend distance is up to 25m ( it depends on the quality and length of the HDMI cable)

lControl: To choose the CEC/IR extends function by manual (it needs to put the two IR Adaptor switch to IR status.

lMAX operation current:15ma

lWeight:35g Housing: plastic box

l  Easy install & operation

l  Power free

Operating and Connecting：

1、To use one HDMI Cable to connect the two IR Adptor HDMI input female port.

２、To connect  one of the two IR adaptor Output port with the HD Source, the other IR adaptor Output port to connect with the Display.

３、  To connect one IR adaptor with the IR-RX port.

４、  To connect the other IR adaptor with the IR-TX port.

Note: Pls use the standard HDMI Cable.！！！